Glass Extraction TowerIt is a rotating impeller type tower extraction equipment. A series of screen plates (stationary rings) divide the tower into several stages along the axial direction. Between each pair of fixed screen plates, there is a turbine-type mixer fixed on the rotating shaft. The turbine rotates within the compartments to generate characteristic flow patterns, keeping the fluid in the turbulent zone inside the tower. Due to the stronger shearing action of the turbine on the liquid compared to a general disc, the mixing effect of the turbine mixer tower is much more intense, allowing the droplets to be well dispersed, thus promoting mass transfer.

The extraction tower is a differential contact tower where the fluid is in continuous contact throughout the entire tower. Two-phase separation occurs at the inlets and outlets. The model based on the droplet cluster theory better describes the fluid flow characteristics within this type of tower. The droplet cluster model provides a comprehensive statistical description of the system and is a function of droplet size, concentration, and related properties in the dispersed phase.

The industrial turbine extraction tower consists of five main parts: oil-water separator (upper and lower), tower body, turbine disk system, feed and discharge system, and electrical control system. The inner diameter and height of the tower are customized according to the customer's process material. Several static rings are set at certain intervals on the inner wall of the tower. The turbine (dynamic ring, disk) is fixed on the central shaft, and the static rings divide the tower into several mixing zones. In each mixing zone, the liquid is mixed through the dynamic ring to achieve two-phase mixing. Each mixing zone is a theoretical stage, and the two-phase liquids achieve multi-stage countercurrent contact mixing during the countercurrent process.

Work Process

The oil phase (light phase) enters from the bottom of the tower and overflows from the top; the water phase (heavy phase) is added at the top and exits from the bottom. Both flow in opposite directions within the tower.

Turbine Agitator Blade: Provides necessary radial mixing and phase dispersion, enabling the turbine blade design to more closely approximate uniform droplet sizes of the dispersed phase and to more accurately predict the flow characteristics of two-phase fluid dynamics, based on hydrodynamic research data.

Tiers: Separated to form a single compartment, they can reduce fluid axial backmixing while achieving excellent dispersed phase residence time.

To meet customer needs, Pure Extraction offers extraction equipment consultation and services: from initial communication and planning of process objectives or operational conditions, to design, customization, and production manufacturing, helping you build the ideal extraction equipment for your peace of mind. Welcome to inquire!

Hotline for inquiries: 15380766707!

Key Features

● The equipment employs a turbo-mixed component, with each theoretical tray offering high mixing efficiency, thus reducing backmixing phenomena.

●The static ring is made with a porous, plate-type structure, optimizing the two-phase liquid countercurrent contact state and offering good dispersed phase retention rate.

● Turbine hybrid structure, forming internal recirculating flow in each mixing zone, effectively reducing the amplification effect of large turbine towers.

● For material systems with rapid two-phase separation, the turbo-extraction tower can provide better mixing effects.

● The equipment is highly adaptable and can handle large volumes.

● Turbine mixing structures also demonstrate good application effects for gas-liquid reactions.

Wide range of applications, including petrochemical, fine chemicals, fermentation industry, and environmental protection.

Application Fields

● Heavy oil extraction for petrochemical industry, used lubricant oil recycling, etc.

● Extraction and reverse extraction of fermentation broth in the pharmaceutical industry: such as the extraction and reverse extraction of lincomycin, taxol extraction, etc.

● On**Acid washing, alkali washing, water washing, and glycosides, alkaloids, and other organic extraction and reverse extraction used in the health product industry for lipid solvents.

●Washing, extraction, and reverse extraction of organic solvents in the chemical, fine chemical, and agrochemical industries.

● Hydrometallurgical industry for zinc recovery from nickel and cobalt, from leachate and crude**Reprocessed uranium in liquid form.

Extracting compounds from vanilla in the fragrance and flavor industry and extracting citric acid from syrups, etc.

● Used in the environmental protection industry for wastewater treatment**Removal of dimethylformamide from leather waste water, organic acid removal, and organic aluminum removal. Recovery of T acid and H acid, etc.

● Extract from aqueous solution**Recycle N,N-=**、**Amine**Dimethyl sulfoxide, diphenylamine, and other solvents.

Technical Specifications

Tailored to meet the actual extraction process requirements of customers, welcome to inquire:15380766707  ！