FT-100H Series Automatic Powder Compaction Density Gauge
Feature Description:Function description
Adopt71寸touch screenPCSoftware control; the load unit control system collects stress change data, pressure and time data can be set.Sample thicknessDirect read, automaticAndManual operation mode coexists;Vacuum Forming MoldsStandard ConfigurationPCSoftwareAnalyzeStress、Density、TimeDisplacementProcess Data MapNew energy battery materialsR&D (Research and Development)Quality and craftsmanshipEstablish data models.Supplying China/Please provide the Chinese content to be translated into American English.
WorkPrincipleOperational principle
FT-100H Series Automatic Powder Compaction Density Gauge
During the compression process under external force, as the powder moves and deforms, larger voids are filled, the contact area between particles increases, causing an attraction between atoms and strengthening the mechanical wedging between particles, thereby forming a compact with higher density and strength..
Refer to StandardReference standards
GB/T 30835-2014 Lithium-ion battery anode material with carbon composite lithium iron phosphate
GB/T 30836-2014Lithium-ion battery-grade lithium titanate and carbon composite anode materials
GB∕T 24533-2019 Lithium-ion battery graphite anode materials
GB/T 44330-2024Lithium-ion battery cathode material - Determination of powder compaction density
GB/T 41232.2-2021/IEC/TS 62607-4-2:2016
Nano manufacturing Key Control Features Nano-energy storage Section2Partial: Density testing of nano cathode materials
Can also be used for the determination of compaction density of powders and granules with similar properties.
FT-100H Series Powder Automatic Compaction Density Meter
Testing Items | FT-100F-5T Upgrade Model |
1. Main pressure | 5 tons |
2. PowerSystem | Servo Power |
3.Displacement Measurement | Positioning sensor systemItinerary0-20mm,Resolution0.001mm |
4Display Method | 7-inch touch screen + PC software |
5.Mold
| 5 tonsStandard ConfigurationInside Diameter:13mmOptionalInside Diameter12.8mm,15mm；16mm；20mm） Note: Molds are consumables, standard configuration upon shipment1 set, available for spare order |
6Molding release method | Automatic |
7Protective Device | Automatic diagnostics, overload protection, and emergency stop control |
8.Time Setting | Constant Pressure Time0-99.9S；0.1S |
9Density Value | 99.99999g/cm3 |
10Variable shape | Measurable deformation of elastic materials0.01%----50% |
11Balance(Select) | 0.00001g, Range: 120g |
12Displacement Speed | Less than15mm/minResolution0.1mm/min |
13Power Supply | 220V/380v |
14.Overall error | Sample CharacteristicsDifferenceDensity≤1% |
15. Selection Items | a. Extended Warranty Service; b. Measurement Services; c. Computers and Printers; d. Vacuum Packer; e. Molds |
