FT-102A-II Vibrating Screen Loose Density Tester
Function Description: Function Descriptioncription
Suitable for funnels that cannot pass through an aperture of 5.0mm in the funnel's hopperPowders and granules.
Reference Standards
GB/T 31057.1-2014 Part 1: Measurement of Bulk Density of Particulate Materials (Vibrating Screen Method)
Principle
Vibrate under specified conditions to allow the powder to freely fall from the funnel and fill a known volume cylindrical cup, expressing the powder's bulk density in terms of the mass per unit volume of powder; utilize a vibrating structure to assist in the flow and filling of powders and granules from the funnel, simulating production and processing conditions to aid in the movement and filling of raw materials.
Parameters and specifications
Model and Specifications | FT-102A-II |
1. Test Method | Vibrating Screen Method |
2. Reference Standards | GB／T31057.1-2014 |
3. Funnel outlet diameter | Funnnel Outlet Aperture: 5.0mm and 8.0mm |
4. Funnel Configuration | Detachable combination funnel with sieve |
5. Density Cup | Volume of density cup: 25ml; distance to funnel: 25mm |
6. Vibrator | Frequency adjustable.Horizontal vibration, amplitude of 50μm~100μm |
7. Application Scope | Suitable for powders with particle sizes ranging from 5μm to 5mm. Powders outside this range may refer to this section for guidance. |
8. Power Supply | 220V; Frequency 50Hz~60HzCustomizable |
