FT-102ASeriesVibration Funnel（Vibration Screen）Loose Density Tester
Function Description:Function description
Suitable for materials that cannot freely flow through a funnel with an orifice size of5.0mm funnelPowders and granules。
Not suitable for metal powders that are prone to breakage during the vibration process.(As specified in GB/T1479.2, this method is stipulated for the determination of the bulk density of the powder.)
Refer to StandardsReference standards
FT-102ASeriesVibration Funnel（Vibrating Screen）Loose Density Tester
Function Description:Function description
Suitable for materials that cannot pass through the orifice of the funnel method5.0mm funnelPowders and granules。
Not suitable for metal powders that are prone to breakage during the vibration process.(As specified in GB/T1479.2, this method is stipulated for the determination of the bulk density of the powder.)
Reference StandardReference standards
GB/T 1479.3-2017Metal powder Determination of Bulk Density Chapter3Partial: Vibration Funnel Method
ISO 3923-3:1980Determination of Apparent Density of Metal Powders3Partial:Oscillating Funnel Method
SJ/T 10215-1991 Determination of Bulk Density of Magnetic Oxide Powders-Vibration Funnel Method
GB／T31057.1-2014Physical Properties Testing of Granular Materials1Measurement of bulk density（Vibration Sieving Method）
PrinciplePrinciple
Vibrate under specified conditions to allow the powder to freely fall from the funnel, filling the cylinder cup of a known volume, and express the loose bulk density of the powder as the mass per unit volume.；Utilize vibration structure to assist in the flow of powders and granules out of the funnel, simulating production processing conditions to aid in the flow and filling of raw materials.
Parameter Data
Model and Specifications | FT-102A-I | FT-102A-II |
1.Testing Method | Vibration Funnel Method | Vibration Sifting Method |
2.Reference Standards | GB/T 1479.3-2017；ISO 3923-3:1980 SJ/T 10215-1991 | GB／T31057.1-2014 |
3.FunnelBore diameter | FunnelBore diameter:7.5 mm | FunnelBore diameter:5.0mmAnd8.0 mm
|
4.Funnel configuration
| Integrated structure | Detachable combination funnel with sieve |
5.Density Cup | Density Cup Volume25mlFunnels spacing25mm | |
6.Vibrator | FrequencyAdjustableHorizontal Vibration,Amplitude of50μm~100μm | |
7.Application Scope | Metal powder | Suitable for particle diameter5μm~5mmPowders not within this scope.,Refer to this section for guidance. |
8.Power Supply | Input:220V;Frequency50Hz~60HzCustomizable | |
FT-102ASeriesVibration Funnel（Vibration Screen）Loose Density Tester
Function Description:Function description
Applicable for materials that cannot freely flow through a funnel with an aperture of5.0mm funnelPowders and granules。
Not suitable for metal powders that are prone to breaking during the vibration process.(As specified in GB/T 1479.2, this method is provided for the determination of the bulk density of the powder.)
Refer to StandardsReference standards
GB/T 1479.3-2017Metal powder Determination of Bulk Density Chapter3Partial: Vibrating Funnel Method
ISO 3923-3:1980Determination of Apparent Density of Metal Powders3Partial:Oscillating Funnel Method
SJ/T 10215-1991 Determination of Bulk Density for Magnetic Oxide Powder-Vibration Funnel Method
GB／T31057.1-2014Physical Properties Testing of Granular Materials1Measurement of bulk density（Vibration Sieving Method）
PrinciplePrinciple
Vibrate under specified conditions to allow the powder to fall freely from the funnel, filling the known volume of a cylindrical cup, and express the loose bulk density of the powder as the mass per unit volume.；Utilize a vibration structure to assist in the flow of powders and granules out of the funnel, simulating production processing conditions to aid in the flow and filling of raw materials.
Parameters and specifications
Model and Specifications | FT-102A-I | FT-102A-II |
1.Testing Method | Vibration funnel method | Vibration Sieving Method |
2.Reference Standards | GB/T 1479.3-2017；ISO 3923-3:1980 SJ/T 10215-1991 | GB／T31057.1-2014 |
3.FunnelBore diameter | FunnelBore diameter:7.5 mm | FunnelBore diameter:5.0mmAnd8.0 mm
|
4.Funnnel Configuration
| Integrated structure | Detachable combination funnel with a sieve |
5.Density Cup | Density Cup Volume25mlFunnels spacing25mm | |
6.Vibrator | FrequencyAdjustableHorizontal Vibration,Amplitude of50μm~100μm | |
7.Application Range | Metal powder | Applicable for solid particle diameter5μm~5mmPowders not within this scope.,Refer to this section for guidance. |
8.Power Supply | Input:220V;Frequency50Hz~60HzCustomizable | |
