Product Details

Single Cylinder Hydraulic Press Product Introduction:

The body features a C-type single-armed structure with three open sides for ease of operation. After welding, it undergoes vibration and tempering treatments to ensure the frame does not deform.

Primarily used for the assembly of various shafts, light drawing, forming, and pressing of metal products, as well as bending, stamping, and fitting of parts. It is suitable for internal combustion engines, light textile machinery, shafts, bearings, washing machines, automotive motors, air conditioning motors, and electrical appliances.

Universal small assembly equipment for automotive parts manufacturers

Single-column hydraulic press advantages

1: Utilizes high-speed hydraulic cylinders, operates at high speed initially and then slows down, low noise, high efficiency, and low energy consumption.

2: Sliders equipped with up/down electronic sensors for positioning, long lifespan, and easy operation.

3: Features pressure protection, limit, semi-automatic, and manual control functions

4: Optional infrared hand guard can also be installed according to customer requirements

Features:

1. The pedestal hydraulic press is a welded structure, boasting features like excellent rigidity, stability, and high speed.

2. This hydraulic press series is powered by a liquid pressure of 2-20MPA, and it is compatible with an external three-phase AC380V 50HZ or AC220 60HZ power supply.

3. This series of equipment transfers energy using a liquid medium, employs an advanced parent-child cylinder hydraulic circuit, features low oil temperature, and has a no-load speed exceeding 150mm/s, with an operating speed of less than 30mm/s.

4. Equipment in standby mode, noise during smooth up and down movement does not exceed 75 decibels.

5. Featuring both manual and semi-automatic control modes, manual operation allows the press mold to stop at any travel range. Equipped with an emergency return button, infrared hand guard can also be added.

6. The pressing stroke of this series of press machines is generally controlled by a timer, pressure switch, position sensor, or the customer's own mold.

7. The return height of the press main shaft can be adjusted within any travel range, either through a timer or a position sensor.

8. Pressure, stroke, holding time, and closing height are all adjustable by the customer for ease of operation; features automatic counting function, can also be equipped with a force gauge display, a smart temperature controller, and can be customized according to customer requirements.

9. This series of hydraulic machinery offers output ranges from 15tf to 100 tf in various specifications. (1tf = 1000kgf = 9.8KN).

Custom orders supported!