FYXDbIntrinsically Safe Fixed Type IgnitersPrimarily used for automatic ignition in gas and oil industrial burners and ground flare systems, featuring reliable ignition, long lifespan, and more. The ignition end is resistant to high temperatures and coking, with self-cleaning capabilities.

Section 1:          Technical Specifications

1.         Power Supply:220Ｖ±10%　50/60HZ

2.         Spark Energy12J

3.         Application Range: Positive Pressure Furnace Nozzles

4.         Ignite fuel: Gas

5.         Ignition Rod Length:L(Determined by the length of the pilot light on the burner)

Section Two:          Instructions for Use

1.         Integrated fixed high-energy igniterIgnition for pilot lights on positive pressure furnace burners.

2.         First, install the igniter on the everburning lamp.

3.         Then,220V AC Plug the power into the igniter, and it will ignite.

4.         Wiring instructions are inside the igniter cover.

III.          Cautionary Notes

1.         Handle with care during use; do not drop or strike to prevent electrical components from malfunctioning and failing to ignite.

2.         The igniter contains a high-voltage component. Users are advised not to disassemble it themselves to prevent the risk of electric shock.

3.         The igniter should be placed in a dry environment to prevent the electrical components and insulating materials inside the igniter from becoming damp, which could cause the igniter to fail to ignite.

The igniter ignites through a discharge process, during which the internal components operate under high voltage and high current. Therefore, the continuous discharge time for each ignition should not exceed30Seconds, if the flame is not lit on the first try, the switch must be turned off.30Restart after a few seconds to prevent internal components from overheating and damaging.