SJB-D60 Manual Oil Filler Pump (0.63 MPa)
I. Overview
Suitable for refilling grease into the reservoirs of manual lubricating pumps or small electric lubricating pumps for pressure classes of 10MPa and 120MPa.
II. Technical Specifications

Lubricating grease with a penetration of 310-385 (25°C, 150g) 1/10mm (NLGI 0#-1#).
Section 3: Model Description

Four: Dimensions

5. Working Principle
As the handle moves downward, the upper valve closes, and the volume of the upper chamber of the piston gradually decreases, sending grease along the conveyor hose to the oil reservoir. The lower volume of the piston gradually increases, creating a vacuum, which opens the suction plate and draws grease from the oil drum. When the handle moves upward, a vacuum is formed in the upper chamber of the piston, the upper valve opens, the suction plate closes, and grease enters the upper chamber of the piston. When the handle moves downward again, the process is repeated.
Section 6: Instructions for Use
1. During use, connect one end of the oil delivery hose to the fuel pump outlet and the other end to the oil storage tank's supply opening. After use, secure the other end to the lid bolt.
2. The lubricant used must be clean, uniform in texture, and within the specified brand range.
3. Regularly check the oil level inside the drum to prevent air from being吸入 into the storage tank when it's oil-free.






























