One,Universal Tensile Testing MachineTechnical Specifications:

Range (0-5000N)

2: Test Accuracy ≤ 0.5%

3: Large Deformation Device Test Precision ±1mm

4: Test speed 0-500 mm/min

5: Traveling Space 1200mm

6: Test Width 350mm

7: Use power supply 220V 50Hz

8: Motor Power 400W

9: Equipment dimensions approx. 560×650×1700mm

Approx. 180 kg for the equipment.

11: Metal Extensometer Resolution 1/1000

12: Metal extensometer ≤ 0.5%

13: 7-stage automatic force amplification switching

14: Force Resolution: 1/100,000

Displacement Resolution: 1/1000

Two,Universal Tensile Testing MachineSoftware Features Introduction:

1. The computer tensile testing machine software can automatically read test data such as tensile strength, yield strength, breaking strength, elastic modulus, and elongation. The formula editor can automatically calculate force, stress, displacement, deformation, and other data results at any point during the testing process. The control of the testing process and data processing meet the requirements of the national standards for metallic and non-metallic materials.

2. Control Methods: Options include set speed, set position, set load, set load increase rate, set stress, set stress increase rate, set strain, and set strain increase rate, etc.

3. Auto-zero: The measurement system automatically zeroes out after the test begins.

4. Automatic Gear Shift: Switches to the appropriate range automatically based on load size to ensure the accuracy of measurement data.

5. Automatic Data Backup: Test data and conditions are automatically saved to prevent data loss due to forgetting to save.

6. Batch Testing: Once set for samples with the same parameters, a batch of tests can be sequentially completed.

7. Display Method: Data and curves are dynamically displayed throughout the testing process.

8. Curve Traversal: After the test is completed, the curve can be re-analyzed using the mouse to find the corresponding data for each point on the test curve.

9. Curve Selection: Selectable curves for display and printing include stress-strain, force-displacement, force-time, and displacement-time.

10. Unit Switch: Force Units: (g, kg, N,), Stress Units: (Displacement Units: (m, mm, in))

11. Test Report: Test reports can be programmed and printed according to customer requirements, and can be exported as Excel files.

12. Safety Protection: Automatic safety protection is initiated when the load exceeds 2-10% above the maximum capacity.

13. Automatically detects and calculates the mechanical property indicators of samples, also allows for manual intervention in the analysis process, and corrects the automatic analysis results according to relevant standards to enhance data accuracy.

ThreeUniversal Tensile TesterDetailed Specifications:

1: A set of high-precision German进口 tension-force dual-function sensors

2: Capacity Segments: Full Range of 7 Steps: ×1, ×2, ×5, ×10, ×20, ×50, ×100

Utilizing high-precision 24-bit A/D conversion, sampling frequency of 200Hz, full-range force resolution of 1/1,000,000.

3: Power System: Panasonic Motor + Panasonic Inverter + German Ball Screw + German Linear Bearing + Korean Timing Belt/Synchronous Gear Drive

4: Control System: Utilizes PulseCommand control method for faster control with a range of 0~500mm/min. Automatically returns to the initial position and shuts down after testing, with automatic calculation and storage.

5: Data Transmission Method: USB Transfer

6: Display Method: LCD computer screen display for tensile testing machine software.

7: Full-range single-speed and precision full seven-speed linear dual-calibration system.

Version testing interface software allows for control modes such as setting speed, positioning, load, load increase rate, stress increase rate, and strain increase rate, plus multi-stage control modes to meet various testing requirements.

9: Test Space: Test width approximately 350 mm, stroke space approximately 1200 mm

10: Full Range Displacement: Imported encoder enhances 4x testing accuracy, featuring anti-interference capabilities

11: Safety Device: Overload automatic shutdown with electronic limit protection

12: Manual Operation: Can be equipped with a wireless remote control device or a manual operation box

FourUniversal Tensile Testing MachineAttachment:

1: One set of operation manual/One set of certificate of conformity

2: One set of testing fixtures

Set of manual operation control devices

4: One set of large deformation device

1: One set of LCD brand computer

6: Set of Color Printer/Laser Printer

One USB data transfer cable

8: One set of software (for installation on a computer)