DWFSeries Belt Dryers belong to the jet air belt drying type, where hot air is ejected simultaneously from above and below in a hole beam stream towards the logistics on the conveying belt. Due to the high jet air speed of up to15m/sAbove, the heat transfer film is thin, with a high heat transfer coefficient, and a fast drying speed.DWFSeries belt dryers, when used for airtight materials, the jet air above still returns to the top, and the air jetted below returns to the bottom, participating in the circulation. They have strong penetration and diffusion within the material for breathable materials. Heat sources can be steam, electric heating, hot air furnace, and flue gas from fuel combustion, etc.DWFThe type jet air flow belt dryer is mainly used for fiberboard, gypsum board, cardboard, pulp film, coated drying, etc., and is also suitable for drying sheet materials and some special materials.
DWFSeries belt dryers belong to the jet air flow belt drying type, where hot air is ejected simultaneously from both top and bottom through a hole bundle stream towards the logistics on the conveyor belt. Due to the high jet air speed of up to15m/sAbove, the heat transfer film is thin, with a high heat transfer coefficient and a fast drying speed.DWFSeries belt dryers, when used for airtight materials, the jet air above still returns to the top, and the air below still returns to the bottom, participating in the circulation. They possess strong penetration and diffusion within the material for breathable materials. Heat sources can be steam, electric heating, hot air furnaces, and flue gases from fuel combustion.DWFThe type jet airflow belt dryer is mainly used for fiberboard, gypsum board, cardboard, pulp film, coated drying, etc., and is also suitable for drying sheet materials and some special materials.
DWCSeries intelligent belt-type through-flow dryers are widely used in the dehydration drying industry for sheet, strip, block, and granular materials in various industries such as food, agricultural and sideline products, dehydrated vegetables, aquatic products, special local products, feed, and chemical raw materials.
·This series of dryers features high energy efficiency, excelling in cross-flow heating, layered air intake, segmented temperature control drying, and waste heat recovery. The main performance indicators meet the standards of the late 1990s.
·This series of dryers uses multi-layered movable stainless steel belt or vibration plate for spreading the processed material. Hot air passes through the belt and the material layer above it from bottom to top, ensuring even and efficient heat exchange with high production efficiency and good product quality. Equipped with a cooling layer and a rotating feeding device, the discharged material temperature is low, facilitating timely packaging.
·The conveying device with a metering unit ensures uniform thickness of the spread material, with the material layer thickness capable of being infinitely adjusted.
·Area of spreading25m2—70 m2Five models of varying sizes to meet the needs of various materials and production scales.
