The Xuchang Infrared Technology Research Institute Co., Ltd. is located on Yongxing East Road, New Technology Development Zone of Xuchang, Henan (Zhongyuan Electric Valley), and was previously known as the Xuchang Infrared Technology Research Institute. It is one of the influential infrared heating research institutions in China. The heat source of this infrared industrial dryer comes from a combustion unit, and the dryer employs a countercurrent heating method. Consequently, the material to be dried enters the drum from the feed hopper and feed chute, being pushed backward by the spiral scraper. Due to the inclined placement of the dryer, the material flows backward under the influence of gravity and rotation, while also being repeatedly lifted by the scraper, carried to the top, and then continuously scattered down, forming an even curtain inside the drum. This allows the material to undergo sufficient heat exchange with the hot gas flow inside the drum. As the material is repeatedly scattered, the moisture content gradually decreases, achieving the drying objective. The infrared industrial dryer is generally categorized as:Infrared rotary dryer, infrared drum dryer, infrared industrial dryer. Application range of the infrared industrial dryer:Infrared rotary drum dryers are widely used in industries such as food, feed, chemicals, and mining. The operation process of the equipment is as follows::Dried wet material is added to the dryer, where it is evenly distributed by the scraper blades inside the drum. The material is uniformly dispersed within the dryer and comes into full contact with hot air, accelerating the heat and mass transfer during the drying process. Throughout the drying process, under the influence of the inclined scraper blades and the hot gas, the material is discharged as finished product at the star-shaped discharge valve at the other end of the dryer. This machine is suitable for materials with moisture content less than85%Drying various waste materials such as beer dregs, soybean dregs, spray-dried corn bran, coal sludge, fruit pomace, etc., has a good effect on exploring feed resources, reducing feeding costs, and reducing environmental pollution. The motor drives the grinding disc through a reducer, and the material falls onto the grinding disc from the feeding port via a lock-air feeder.zCentrifugal force moves the material towards the rim of the mill as the mill disk rotates. As the material passes through the annular grooves on the disk, it is crushed by the roller. The crushed material is then picked up by the high-speed airflow of the wind ring at the rim. Larger particles fall back onto the disk for re-grinding. As the material flows through the upper separator, coarse particles fall back into the mill disk for re-grinding under the action of the rotating rotor, while the fine particles exit with the airflow. The collected product is obtained through a dust collection system. Moisture-containing material is dried during contact with the hot airflow. By adjusting the infrared temperature, it can meet the requirements of materials with different humidity levels to achieve the desired product moisture content. Adjusting the separator can achieve the required fineness for different products. It is due to the continuous reform and innovation of the product that the machine can meet the various needs of different users and has established a strong presence in numerous fields such as the cement industry, chemical industry, water conservancy industry, power plant industry, ceramics industry, and has earned high praise and acclaim from numerous users.!Xuchang Infrared Institute will continue to focus on the research and development of infrared radiation heating technology to enhance...qEfficiency, reliability, and system lifespan, providing for you,zPure infrared heating technology solutions.