Infrared Radiation New Technology Experimental Heating Equipment

The Xuchang Infrared Technology Research Institute Co., Ltd. is located at the Yongxing East Road, New and High-Tech Development Zone (Zhongyuan Electric Valley) of Xuchang, Henan. It was previously known as the Xuchang Infrared Technology Research Institute and is currently one of the influential infrared heating research institutions in China. The experimental heating device of the new infrared radiation technology utilizes infrared radiation to heat objects, which absorb the infrared radiation and convert it into thermal energy for heating. Infrared radiation is a type of electromagnetic wave. In the solar spectrum, it lies beyond the red end of visible light and is an invisible form of radiant energy. In the electromagnetic spectrum, the wavelength range of infrared radiation is0.75~1000Between micrometers, the frequency range is3×10~4×10In industrial applications, infrared spectra are often divided into several bands.:0.75~3.0Micrometers for the near-infrared region;3.0~6.0Micrometers are for the mid-infrared region.;6.0~15.0Micrometers fall within the far infrared region.;15.0~1000Micrometers are in the far infrared region. Different objects have varying abilities to absorb infrared radiation, and even the same object can have different absorption capabilities for infrared radiation of different wavelengths. If usedXTo capture a photo of a crystal defect with a light machine, typically it requires...7-15Daylight exposure time, whereas using infrared radiation sources only requires a few seconds or minutes, increasing work efficiency by tens of thousands. The high-luminosity characteristic determines that infrared radiation sources can be used for many tasks that conventional light sources cannot perform. Therefore, when using infrared new technology for heating, it is necessary to select an appropriate infrared radiation source based on the type of object being heated, so that the radiant energy is concentrated within the absorption wavelength range of the heated object to achieve a good heating effect. The experimental heating device of the new infrared radiation technology Infrared heating is actually a special form of resistance heating, using materials such as tungsten, iron-nickel, or nickel-chromium alloys as the radiating body to form the radiation source. Once powered on, heat radiation is produced due to its resistive heating. Common electric infrared heating radiation sources include lamp-type(Reflective)Tubular(Quartz Tube)With board pattern(Flat-style)Three types. The lamp type is an infrared bulb, with a tungsten filament as the radiant body.,Tungsten filaments sealed within a glass shell filled with inert gas,Like a standard light bulb. The radiator heats up when electricity is applied.(Lower temperature than general light bulbs),Thus, emitting a large amount of wavelengths1.2Approximately micrometer-sized infrared radiation. If a reflective layer is coated on the inner wall of the glass shell, the infrared radiation can be concentrated towards one direction, hence the lamp-type infrared radiation source is also called a reflective infrared radiation emitter. The tube-type infrared radiation source is made of quartz glass, with a tungsten filament in the middle, therefore also known as a quartz tube-type infrared radiation emitter. The wavelengths of the infrared radiation emitted by the lamp and tube types are0.7~3Within the micron range, the operating temperature is lower, generally used for heating, baking, and drying in light and textile industries. The radiation surface of the plate-type infrared radiation source is a flat surface composed of flat resistive plates, with a material with a high reflectivity coating on the front side of the plates.,The reverse side is coated with a material of low reflectivity coefficient.,So most of the heat energy is radiated outwards. The working temperature of the panel can reach1450Above 100℃; used for annealing welds in steel materials, large-diameter pipelines, and containers. Due to its strong penetration ability, infrared radiation is easily absorbed by objects, and once absorbed, it is immediately converted into heat energy.;Infrared heating experiences minimal energy loss before and after heating, temperature control is easy, and the heating quality is high, thus, the application and development of infrared heating is progressing rapidly. The Xuchang Infrared Institute will continue to focus on the research and development of infrared radiation heating technology to enhance safety.qEfficiency, reliability, and system lifespan, providing for you,zPure infrared heating technology solutions.