Rike Micro Economic Type Powder Resistivity Tester - Hydraulic
Overview:
The four-point measurement method is applicable to lithium battery materials, graphene, graphite, carbon powder, coking, petrochemicals, powder metallurgy, colleges and universities, and scientific research departments. It is a tool for inspecting and analyzing the quality of conductive powder samples.4.3Inch LCD screen display, simultaneously showing resistance value, resistivity, conductivity value, temperature, pressure value, with automatic unit conversion, standard configurationFT-01AManual Powder Measurement Device.Film switch panel, available in both Chinese and English operating interfaces
Rico Micro Economic Powder Resistivity Tester, Hydraulic Type
II. Reference Standardsstandard：
YST 587.6-2006 Carbon Anode Calcined Petroleum Coke Test Method No.6Partial measurement of powder resistivity; Standard manual powder testing device,When testing the powder, the device can obtain data such as the height, diameter, and pressure after the powder is compacted, and automatically calculate the required data..Conveniently resolve measurement needs for resistivity, resistivity rate, and conductivity of powders and granular materials..
Section 3: Reference Standards:
1）GB∕T24521-2018Carbon raw material and coke resistivity measurement method;Pressure requirements3.9MPa±0.03MPaPowder mold inner diameter16mm-16.3mmHeight Measurement Range:15-17mmTest Current500mAThese parameters dictate instrument selection.b.Height Measurement Range:0.001-25.000mmPressure Rangea.200kg；b.Mold Internal Diameter16-16.3 mmMold stroke height25mm）.
Rike Micro Economy Type Powder Resistivity Tester, Hydraulic Model
2）.YS/T 587.6-2006 Petroleum coke after calcination testing method for carbon anodes6Measurement of Partial Powder Resistivity;
ISO 10143-1995 Determination of resistivity of calcined carbon granules for aluminum production electrode materials ；
Requirements:c.Mold Inner Diameter30mmPressure requirements3 MPa±0.03MPa（300kgRange;c.Mold Inner Diameter30mm；
3Particle characteristics factors outside,During the powder resistivity test process,Pressure and mold cavity volume determine the effect of compaction density on powder conductivity..In addition to standard requirements; Recommend selecting small-sized mold cavities.
