FT-201A Series Conductor Powder Resistivity Tester, Automatic Pressure Application
I. OverviewOverview：
UtilizingPCSoftware automatically measures and reads the height and real-time resistance during the sample compression process./Resistivity/Conductivity process data.Automatically generate reports, describe process change curve charts, automatically step-up pressure, automatic demolding, automatic constant pressure measurement.USBAnd232Communication port, four-point measurement mode, constant current source measurement, automatic gear shift, selectable pressure range, brass-copper electrodes, rotating electrode structure, easy operation.
Section II: Application ScopeScope of application：
Conductive powder requiring electrical property analysis, such as for lithium battery materials, graphene, graphite, carbon powder, coking, petrochemical, powder metallurgy, and related production and processing departments; universities, research institutions, quality inspection agencies, quality management departments, R&D departments, etc.
FT-201A Series Conductivity Powder Resistance Meter Automatic Pressure Application
Section 3: Reference Standards:
1）GB∕T24521-2018Carbon raw material and coke resistivity measurement method;Pressure requirements3.9MPa±0.03MPaPowder mold inner diameter16mm-16.3mmHeight Measurement Range:15-17mmTest Current500mAThese parameters dictate instrument selection.b.Height Measurement Range:0.001-25.000mmPressure Rangea.200kg；b.Mold Internal Diameter16-16.3 mmMold stroke height25mm）.
2）.YS/T 587.6-2006 Testing Method for Calcined Petroleum Coke Used in Carbon Anodes6Measurement of Partial Powder Resistivity;
ISO 10143-1995 Determination of resistivity of calcined coke particles for aluminum production electrode materials ；
Requirements:c.Mold Internal Diameter30mmPressure requirements3 MPa±0.03MPa（300kgRange);c.Mold Internal Diameter30mm；
3Particle characteristics factors external,During the powder resistivity test process,Pressure and mold cavity volume determine the effect of compaction density on powder conductivity..In addition to standard requirements,; Suggest selecting small mold cavity sizes..
FT-201A Series Conductor Powder Resistivity Tester, Automatic Pressure Application
Model and Specifications | FT-201A |
1.Resistor | 10^-7～2×10^7Ω |
2.Resistance range | 10^-7～2×10^7Ω-cm |
3.Conductivity | 5×10^-7～10^7s/cm |
4.Test Current Range | 1μA，10μA，100µA，1mA，10mA，500mA ,1000mA |
5.Voltage Measurement Range | Voltage Range:2mV Resolution20mV 200mV 2V：0.1uV Measurement Accuracy±（0.1%） |
6.Current Accuracy | ±0.1% |
7.Resistance accuracy | ≤0.3%Standard Resistor,Resolution0. 1μΩ |
8.PCSoftware Interface | Resistance value, resistivity, conductivity value, temperature, pressure value, automatic unit conversion, cross-section, height, curve charts, reports, compaction density. |
