FT-300A Series Conductivity Tester for Conductor Materials, Carbon Block Resistance Detector

 One.Overview:

The four-point measurement method is applicable to manufacturing enterprises, colleges and universities, research departments, and laboratories; it is a tool for inspecting and analyzing the quality of conductor and semiconductor materials. It can be configured with different measurement devices to test the resistivity of various types of materials. Features include a liquid crystal display, temperature compensation, automatic range, automatic measurement of resistance, resistivity, and conductivity data. Constant current source output; optional accessories:PC software for process data handling and standard resistor calibration instruments, with a choice of Chinese or English interface for thin film switches.

FT-300A Series Conductor Material Resistivity Tester, Carbon Block Resistance Tester

Specification ModelFT-300A1FT-300A2FT-300A3FT-300A4

Resistor10-7～2×107Ω10-6～2×107Ω10-5～2×106Ω10-4～2×105Ω

2. Resistance range10-8～2×108Ω-cm10-7～2×108Ω-cm10-6～2×107Ω-cm10-2～2×107Ω-cm

Conductivity5×10-8～108s/cm5×10-8～107s/cm5×10-7～106s/cm5×10-7～102s/cm

4. Test Current1μA，10μA，100µA，1mA，10mA，1000mA1μA，10μA，100µA，1mA，10mA

5. Measure Voltage

Voltage measurement range: 2mV, 20mV, 200mV, 2V

Measurement Accuracy: ±(0.1% of reading)

Resolution: 0.1uV, 1uV, 10uV, 100uV

6. Current Accuracy±0.1% Reading±0.2% reading±0.2% reading±0.3% reading

7. Resistance Accuracy≤0.3% ≤0.3%≤0.3%≤0.5%

8. Display ReadingLCD Display: Resistance, Resistivity, Conductivity, Temperature, Automatic Unit Conversion, Cross Section, Height, Current, Voltage, etc.

9. Testing MethodsFour-point measurement method

10. Measurement Device

Jig Selection

Standard Cubic and Cylindrical Measuring Devices

2. Test Dimensions: L70mm x W60mm

3. Custom Fixtures

11. Working Power SupplyAC 220V±10%, 50Hz, Power Consumption: <30WH

12. Mainframe DimensionsMain unit dimensions approximately 330mm x 350mm x 120mm

13. Net WeightApproximately 6 kg

14. Standard Configuration, Optional Extras1. Standard calibration resistors, 1-5 pieces; 2. A set of PC software; 3. Computers and printers configured according to customer requirements; 4. One measurement certificate

FT-300A Series Conductor Material Resistivity Tester, Carbon Block Resistance Detector