FT-5300Powder Compressive StrengthAnalyzer

Feature IntroductionFunction introduction

Utilizing a high-magnification optical microscopy system integrated with an automated pressure measurement mechanism, the particle size and real-time crushing process curve of individual particles are measured to characterize powder strength; automated measurement, throughPCSoftware records and analyzes data in real-time.

WorkPrincipleOperational principle

Place the samples on the testing platform,Locate a single particle within the visual area of the planar pressure head under a microscope.,Apply pressure to the granules using a flat die.,Powder particles deform with increasing pressure until they are crushed. Record the curve showing the relationship between the test force and the compression displacement.,Test force during powder compression is the crush force of the particles.；Calculate the particle's surface area based on the particle size.,Further calculate the compressive strength of powder particles.

Application InstructionsScope of Application

Suitable for collapsible,Particle size5μm~50μmDetermination of compressive strength of spherical, sub-spherical, or irregularly shaped powders; not applicable for shapes with明显 unequal axes(As sheets or strips)Powder.

Reference StandardReference standards

GB/T 43091-2023Method for Powder Compressive Strength Testing

Parameters and specificationsparameter 

1.Particle sizeScope: 1-3500μm

2.Particle size measurement method：Image Analysis；Error Rate:<2%

3.Pressure Range:0.001N-2N; Accuracy ≤ 0.5% F.S

4.Data automatic analysis and processing results.

5.Automatic Height Data Collection.

6.Work Environment: Temperature25℃士3℃,Relative humidity not exceeding60%；The testing process should be unaffected by vibration and convection air.

7.Power Supply:220v