Gasoline Generator

How to inspect valve springs Valve springs can undergo plastic deformation after long-term use, causing a reduction in their free length and a decrease in elasticity, which affects the valve's sealing. If the spring breaks, it not only impacts the engine's normal operation but can also lead to the valve falling into the cylinder, potentially damaging the engine. Therefore, it is necessary to conduct a technical inspection of the valve springs during engine overhaul.

The combination of these systems and measures is what we refer to as the **Model Generator Set.** This model generator set is widely used within our scope, demonstrating excellent performance in numerous communication facilities and various corporate settings, among others.

Some customers may ask where the intake holes of your machine are located?

A few days ago, a customer asked me where the intake hole of your machine is. Well, our intake hole is inside the machine, but that louver is also an intake and exhaust hole. The louver can also intake air and dissipate heat, so our machine's intake hole is the louver.

12KW Gasoline Generator (TOYOTI by Dazai Power)

Product Number: TOTO12

Style **

Power Factor 1

Rated Power: 12KW

Higher Power Rating: 13KW

Brand - Dazai Power

Rated Voltage 220|380V

Single-phase | Three-phase

Frequency: 50Hz / 60Hz

Noise Level: 55-60 dB

Starting Method Electric Start (optional fully automatic)

Net Weight 250 kg

Rated Speed: 3000 RPM

Fuel Consumption: 350 G.KW.H (full load)

Engine Model: TO465 (TOYOTI)

Compression Ratio 12:1

Oil Box 40L

Continuous Working Time: 12H

Engine Type: Four-stroke, Four-cylinder, Water-cooled, Single Overhead Camshaft, Inline

Insulation Grade: F Class

Style ** (Beige Grey)

Fuel Type: 90 octane and above

Dimensions: 1210*830*920MM

20-foot container, 22 units

40-foot container, 46 units

40-foot containers, 60 units

Certification: CE/ISO 9000/ISO 2000/CARB/EU/ETL

Operating Environment Temperature: -25°C to 40°C

Electronic speed control, digital display, **, cabinet-style

After-Sales Service Commitment

Our company makes the following commitment for all generator sets sold through Shanghai Eu鲍 Industrial Co., Ltd.:

Pre-Sales Service: Provide detailed and objective introductions to product performance and features, understand the technical requirements of the users for the equipment, select the appropriate model based on the actual usage conditions of the users, and submit comprehensive technical documents and customized solutions. Water-cooled generators can be equipped with permanent magnet motors with 1.5 times the starting current and an ATS device (powers on upon power return, powers off upon power outage).

In-service Support:

Assist users with the design and construction of data center facilities.

2. Deliver goods to the customer's location and provide installation, debugging, and commissioning guidance.

3. Conduct daily operation and maintenance training for direct users on-site.

Provide communication protocols and assist with network access.

Efficient after-sales service

Annually, users' training sessions are held at irregular intervals to provide training in theory and common fault diagnosis and troubleshooting for direct users.

2. Conduct periodic inspections of users 3-4 times annually, providing guidance for routine maintenance.

3. Regularly inspect the equipment operation via phone calls.

4. Respond to repair calls and arrive on-site to address issues within 2 hours.