70kW fully automatic diesel generatorIf your company's server room utilizes a generator, an automatic one can meet your needs. Even if the room is unattended, the machine will still operate. This truly realizes an unmanned server room. Moreover, the machine is equipped with electric leakage protection, oil leakage protection, overload protection, and engine oil protection, safeguarding the generator and server room. This allows you to allocate more human resources to other areas.

Product Model: TO72000ET

Rated Power: 70/73 (kW)

Backup Power: 73/75 (kW)

Rated Frequency: 50/60 (Hz)

Rated Voltage: 220/380 (V)

Rated Speed: 1500/1800 RPM

Single-phase/Tri-phase

Power Factor: 0.9/1.0

AVR Automatic Voltage Regulator

Noise Level: 65-75 dB

Cylinder Quantity: 4 Cylinder

Cooling Method: Closed-loop Water Circulation Cooling

Diesel Fuel Tank: 200L

Fuel Consumption: 206 g/kw?h

Dimensions: 2700×1100×1550mm

Airframe Weight: 1150 kg

Standard configuration of the generator set is as follows:

Voltage, Current, Frequency, Machine Operation Indicators, Cooling Water Tank and Fans, Safety Protection:

Initiate the battery and the battery starter cable connection.

Japanese Industrial Standard Muffler, 20% Lower Than Other *

Optional accessories (additional charges apply)

ATS Automatic Transfer Switch: Activates within 3 seconds of power outage and shuts down automatically upon power restoration.

ATS Automatic Transfer Switch remotely initiated by remote control

Generator Cloud Control System, Variable Frequency Start Device

Adaptive High-Altitude Fuel Injector **Engine Y Version

Compliance Standards: *Certification to ISO9001:2000, Industry Execution Standards GB/T2820.1997

70kW fully automatic diesel generator

Low-noise diesel generator set external structure

The cabinet is square with a flat top, and the bottom is reinforced with a flat steel plate for easy maneuverability.

(2) An air intake and dust-proof box at the rear of the cabinet allows for free air entry during the operation of the diesel generator, effectively preventing sand and dust from entering the cabinet.

(3) Emergency Stop Switch: An emergency stop switch is installed on the right side of the housing for easy shutdown in case of any abnormal conditions with the unit.

(4) The cabinet structure material is corrosion-resistant cold-rolled steel plate, with a smooth and flat surface finish. The surface is spray-painted to *effectively* extend the service life of the cabinet.

(5) Exhaust Louvers: A wind guide hood is installed at the front of the casing to expel air through a wind guide channel, significantly reducing the noise of the unit's exhaust, as well as the backflow of sand, dust, and high temperatures.

(6) Enclosure Windows: Constructed with 2mm cold-rolled steel, featuring a glass window for observing the operational status, effectively preventing sand and dust intrusion during the idle period of the unit.