CX43S Research-grade Biological Microscope

Airframe structure

Constructed with an all-aluminum alloy one-step molding technique for a full metal streamlined body, coated with a nanosilver ion antibacterial coating on the surface to effectively inhibit the reproduction and spread of contact microorganisms. Features a wide voltage power supply adapter (90~230V), complete with USB control output. The panel supports ECO energy-saving mode and brightness following (LIM luminance management) functionality, allowing for continuous brightness adjustment, dual lighting power supply, secondary touch control switches, computer-recognized objective aperture positioning, automatic scale switching software, and automatic loading of preset parameters.

Observation Tube

30-degree tilt, infinite focal range swivel elbow tube, pupillary distance adjustment: 50mm~75mm, unilateral diopter adjustment: ±5 diopters, two-stage light ratio R:T=100:0 or 50:50

Eyepiece

High Eye Point Wide Field Flat Field Eyepiece SWH1023mm adjustable field of view, both eyes adjustable diopters (-2~+8), with stopper pin for anti-rotation. Microscope scale and grid plate available.

Objective lens

1.01 Five ultra-flat field achromatic objective groups 4X (N.A. ≥ 0.10) WD16、10X（N.A.≥0.25 WD4.4）、20X（N.A.≥0.40 WD4）、40X（N.A≥0.65 WD0.7）、100X（N.A.≥1.25 WD0.21）

Focusing Mechanism

Low profile coarse-fine coaxial focusing mechanism. Stroke (focusing range) 28mm, fine adjustment accuracy 0.001mm. With anti-slip adjustable tension device and upper limit device to prevent slicing from being damaged.

Objective lens turret

An integrated inclined five-hole objective lens rotator is built into the microscope body. RMS international standard objective thread interface, with software-encoded magnification recognition during switching (supports simultaneous use with PC camera software).

Slice Holder

Slow-rebound left-hand section holder, supports double glass slides, capable of handling heavy samples like cell counting chambers and counting grids.

Loading Platform

Right-handed low-profile double-layer mechanical load-bearing platform, abrasion-resistant ceramic coated surface, with alloy steel wire transmission structure, no exposed rack teeth, travel range 76mm x 55mm, preset wire tension for comfortable grip, accurate positioning, no jamming, no rebound. The handle wheel can be operated with the hand not leaving the table, reducing fatigue.

Converging lens

Kohler condenser with iris diaphragm scale markings NA 0.1~1.1, supports various lighting methods such as bright field and polarized.

Lighting System

Built-in daylight-simulating LED lighting system, 10W output brightness equivalent to 100W halogen lamps; constant color temperature of 4500K, with a light source lifespan of not less than 30,000 hours; warm white light illumination, with an outlet that supports the installation of 45mm filters.

Camera Interface

An adjustable synchronous standard C-type port for an infinite-far two-color difference correction optical system

Additional Attachments

Optional accessories

Camera

6.3MP high-performance CMOS color camera from the same brand; core components come with a 3-year warranty.

Control Software

Same-brand microscope control software supports automatic magnification recognition, automatic scale change with objective lens switching, and automatic parameter loading.

Fluorescent Device

Pull-out LED fluorescence illuminator, 30,000 hours maintenance-free. Compatible with all standard dye excitation blocks: DAPI, FITC, TRITC, TxRed, etc.

High-precision micrometer caliper, graduation value 0.01mm