Aluminum Pump Introduction

Basic Principle of Aluminum Melt Pumps: Similar to the principle of centrifugal pumps. The aluminum melt flows inside the pump body tube, with the impeller rotating at high speed. Under the action of centrifugal force, the aluminum melt achieves high speed, continuously rising until it reaches the outlet, and is channeled out to flow into the intermediate storage pot, thus achieving the purpose of transporting aluminum melt. The aluminum melt pump consists of the pump body, impeller, and power system. The auxiliary system includes the pump body lifting mechanism, bearing cooling fan, etc. For a reference image of the aluminum melt pump type, please refer to the actual image upon delivery.

(II) Technical Specifications:

1. Usage: Insert the pump body into the aluminum water, manual operation required

2. Power Usage: 380V 50Hz Industrial Power Supply

3. Maximum Aluminum Molten Temperature: ≤800℃

4. Maximum Flow Rate: 200 kg/min

5. Total weight of the equipment is approximately 800 kilograms.

6. Pump Housing Material: High-temperature, aluminum-resistant ceramic, with outer metallic sheath

7. Impeller, shaft material: High-strength Graphite