The Hot Clean Furnace is a new type of specialized equipment designed for cleaning paint line rejects and fixtures, widely used in industries such as air conditioners, refrigerators, microwave ovens, electric fans, computers, and home appliances, as well as motorcycles, bicycles, cars, steel furniture, telecommunications, and power transmission and transformation. It boasts comprehensive performance that meets standard levels. The equipment not only has excellent environmental protection features but also offers significant economic benefits. After being tested by environmental protection authorities, the emissions of SO2, NO, and other waste gases are only 1/10 of the national standard, and its operating cost is just 1/8 of that of paint strippers.
I. Product Application
1. Remove the continuously thickening coating from spray fixtures and clamps without altering the mechanical properties of the fixtures.
2. Complete and thorough stripping of不合格 paint or powder coating from the surface of metal components, with no damage to the workpiece.
3. Clean the paint adhered to the filter mesh and fan blades of the water curtain cabinet.
4. Clean and remove winding and adhered organic matter from wires, cables, transformers, motors, and printing rollers.
5. Clean and remove oils, grease, and other organic substances from parts such as the engine, crankshaft, housing, and piston rings.
II. Specifications and Data
Cabinet: Heavy-duty steel plate steel structure, supported by square and channel steel. Full welding and sealed contact prevent fuel loss due to leakage.
Floor: Rigid refractory castable, 4"-5" (10-13cm) thick, reinforced with steel structural channels. Easy to remove ash.
Door: Equipped with a snap-locking mechanism and high-strength sealing strips. The door can be opened over 180 degrees, ensuring safety and reliability, with ease of use and durability.
Explosion-proof: Unique gravity-sealed top automatically releases excessive pressure, then closes to prevent air from contacting flammable materials.
Adjacent Insulation: The furnace wall, roof, and door are covered with (10-15cm) 2-3 layers of lightweight ceramic fiber blanket insulation, secured with stainless steel pins and stainless steel mesh panels with locking washers, asbestos-free. Metal sleeves prevent mechanical injury to operators from the heat-insulating panels. Clean the furnace insulation rating to 2300F (1275℃).
Exhaust:natural gas(Gas pressure requirement: 5-8 KPa), or light diesel.
Power Supply: 220-250V, 50Hz, Single Phase, 5-10A
Water supply: Minimum pressure 40 psi, maximum pressure 100 psi. Minimum flow rate 5 gpm (15 liters/min).
Normal Cycle: 3-5 hours (including cooling time) with automatic control.
Normal Operating Temperature: 750-800°F (400-430°C)
Pollution Standards: Compliant with new environmental protection standards.
Safety and Health Standards: Compliant with the new OSHA standards. Meets NFPA 86 requirements.
Insurance Standards: Compliant with most national and local regulations.
Corrosion-resistant vapor barrier: Prevents corrosive vapor condensation in the furnace. Significantly extends the lifespan of the blast furnace.
Combustion Chamber Protection: Heavy-duty steel guards are installed around the upper and lower combustion chambers to prevent accidental or careless impacts.
Multiple models of small trucks: Several different models of small trucks can meet your various loading requirements (standard containers).
Gas Burner: Designed specifically for furnace use. Features include an excellent clog-free nozzle design, easy maintenance, and heavy-duty construction. The burner's automatic cooling system prevents nozzle damage.
