1、Thixotropic Chlorine Static MixerThe role of
In the chlorine bleaching section of pulp, the uniform mixing of pulp with chlorine gas is crucial for improving the quality of chlorination. Early on, domestic paper mills commonly used functional pulp-chlorine mixers such as mixing pumps, jet, and turbine agitators, due to...
Severe contamination and unsatisfactory blending effects. In contrast, pulp-chlorine static mixers offer superior blending, zero pollution, simple process, low energy consumption, and easy installation and maintenance, which is why pulp-chlorine mixers have emerged in recent years.
Transition from functional to static.
2、Slurry Chlorine Static MixerThe structure
The slurry-chlorine static mixer is composed of three components: an HR-type chlorine water dispersing mixer①, a slurry-chlorine distributor②, and an MK-type static mixer③. It integrates jet pump technology with static mixer technology, offering reliable performance.
Long service life, excellent mixing effect, achieving the technical level of similar products at home and abroad, and widely used in numerous paper mills domestically.
The slurry chlorine static mixer is a compact device using jet technology. The impact of the jet stream crushes and disperses the chlorine gas, which is drawn in by vacuum, into fine bubbles, and then it is mixed and dissolved in water to form a basically homogeneous solution.
Chlorine water mixture, neutralized through the slurry chlorine distributor ②, then mixed rapidly with the slurry in the MK-type static mixer ③.
3. The working principle of the pulp chlorine static mixer is a tubular device, mainly consisting of several spiral blade mixing elements fixed inside the tube and an external shell, allowing two or more streams to enter the tube body.
Body generates cutting, shearing, rotation, and recombination, achieving good dispersion and full mixing among fluids. Besides being used for pulp chlorine mixture in pulp bleaching, it can also be used for diluting and...
Same variety blend ratio.
Due to the rapid reaction speed of chlorination, improper equipment selection can lead to excessive mixing time and insufficient mixing intensity, resulting in localized over-blighting. Additionally, since the chlorination system (chlorine-water-paste) is
Inhomogeneous; therefore, during the chlorination process, it is crucial to achieve a thorough and effective mixing of the slurry and chlorine water. Inability to mix uniformly will result in uneven contact between the slurry and chlorine gas, inevitably leading to chlorine...
The phenomenon of uneven hydration; excessive residual chlorine also increases corrosion and air pollution. Since the XGH series slurry-chlorine static mixer completely resolves the issue of thorough mixing of slurry, chlorine gas, and water, it is
Selection of paper mill chlorination high-quality homogenized pulp blending equipment.
4、Paste Chlorine Static MixerInstallation
The installation location and piping method of the slurry chlorine static mixer are crucial for reducing chlorine consumption and enhancing chlorination efficiency. Generally, the slurry chlorine static mixer is installed on floors between 6-12 meters high, allowing the slurry to be mixed through the mixer.
Quickly enter the bottom of the upflow chlorination tower, preferable through a short continuous pipeline between the slurry-chlorine mixer and the chlorination tower, to facilitate rapid and thorough mixing of the slurry within the chlorination tower. Slurry-chlorine static mixer
All components of the union fitting are connected by flanges, with the standard flange typically following JB/T81-94, or can be customized according to customer requirements.
