Purchase Process

1. Contact online customer service or call15067702868Inquire about product information

2. Determine the model, quantity, payment method (bank transfer, collect on delivery), transportation, and after-sales service.

3. Fax the sales and purchase contract into effect

4. Both parties shall fulfill their responsibilities and obligations as stipulated in the contract.

Application Scope

1. Suitable for explosive gas environment in Zone 1 and 2 hazardous areas.

2. Suitable for II A, II B, II C explosive gas environments.

3. Suitable for Combustible Dust Environment in Zones 20, 21, and 22.

4. Suitable for environments in temperature groups T1-T6.

5. Suitable for explosive and hazardous environments in oil and petrochemical, chemical, brewing, pharmaceutical, paint, textile, dyeing and finishing, facilities, etc.

Product Features:

1. This product is a Sen恩 explosion-proof model, which can internally accommodate explosion-proof buttons, indicator lights, current meters, switches, voltage meters, and other instruments and components required for control.

2. Operation can be on the box surface, remotely, or both.

3. Available for installation upon customer request, the protective case can display the internal control section, offering high outdoor protection.

All fasteners are made of corrosion-resistant 304-316L stainless steel.

Technical Specifications:

Explosion-proof marking: ExdIIA——C T4——T6 DIP A20, A21 TA, T4——T6

Rated Voltage: AC 220-380V, DC 12V-127V

Corrosion Resistance Grade: F2/WF2

Protection Class: IP54, IP56, IP65

Thread Size: DN15 - DN100 / G1/2' - G4'

Flow Direction: Inward Up, Outward Down; Left In, Right Out (unrestricted)

Line Specifications: 4mm - 80mm (Draughts will indicate)

Installation and Maintenance

Before installation, verify that the data matches the actual usage.

Check all fasteners for looseness; if any are loose, they should be tightened.

3. Ensure proper and reliable grounding inside and outside the junction box.

4. During installation, the cable must be passed through a sealing ring, metal washer, and tightened with a locking nut to ensure sealing and prevent the cable from loosening. Unused terminal ports should be sealed with a sealing ring and metal washer.

5. Disconnect the power source before opening the cover during maintenance checks.