The BK series machine tool control transformers are suitable for circuits with voltages ranging from 50-60Hz up to 500V. They are commonly used as power supplies for machine tool control appliances, as well as for local lighting and indicator lights.

 Terms of Use

Ambient air humidity: -5℃ to +40℃, with a 24-hour average not exceeding +35℃.

2. Installation location altitude not exceeding 2,000 meters.

3. The relative humidity should not exceed 50% when the surrounding air temperature is +40°C, with higher relative humidity permissible at lower temperatures. The average humidity during the wet month is 90%, with an average low temperature of +25°C, taking into account condensation on the product surface due to temperature changes.

4. No areas with severe vibration or shock.

5. Areas protected from rain and snow.

6. Voltage waveform is approximately sine wave.