I. Overview

The PGH-600B generator's electrolytic cell utilizes the internationally advanced solid polymer electrolyte hydrogen production technology, resulting in a gas with oxygen content less than 0.1ppm. It employs pure water as the electrolyte and titanium metal as the electrode. After applying power, the anode produces oxygen. The oxygen is vented, and the gas is separated from water in the gas-water separator, then fully dried through a drying tube before being emitted through the exhaust port. This instrument features a high-sensitivity, fuzzy automatic tracking control system, producing gas on demand and stopping production when not in use, achieving automatic constant pressure and current. This ensures a pressure stability with an accuracy range less than 0.001Mpa, guaranteeing high purity of the output gas, stability, safety, and continuous operation.

Section Two:Key Technical Parameters

Electrolytic Cell: PME Pure Water Electrolytic Cell

2. Purity: 99%

3. Flow Rate: 0-300 ml/min

4. Output Pressure: 0-0.7 MPa

5. Available Pure Water: Water with a resistivity greater than 2MΩ, distilled water twice, or Yibao water

6. Operating Temperature: -15°C to 50°C

7. Pressure Stability: <0.001 MPa

8. Power Supply: 220V ± 10% 50Hz

9. Power Consumption: 150W

10. Dimensions: 360mm x 190mm x 350mm

11. Sink Volume: ≥2.0L

12. Machine Weight: Approximately 13kg