I. Overview

The PGH-300B generator's electrolytic cell employs the internationally advanced solid polymer electrolyte hydrogen production technology, resulting in a gas oxygen content of less than 0.1ppm. It uses pure water as the electrolyte and titanium metal as the electrode. Upon applying power, the anode produces oxygen. The oxygen is vented, and the gas enters the gas-water separator where it is separated from water. After thorough drying through a drying tube, the gas is released through the exhaust port. This instrument incorporates a high-sensitivity, fuzzy automatic tracking control system, producing gas on demand and stopping when not in use, achieving automatic constant pressure and current control. This ensures pressure stability within a range less than 0.001Mpa, guaranteeing high purity and stable, safe, and continuous output gas pressure.

Section Two:Primary Technical Parameters

Electrolytic Cell: PME Pure Water Electrolytic Cell

2. Purity: 99%

3. Flow Rate: 0-300 ml/min

4. Output Pressure: 0-0.7 MPa

5. Available Pure Water: Water greater than 2MΩ deionized water or double-distilled water or Yibao water

6. Operating Temperature: -15℃ to 50℃

7. Pressure Stability: <0.001 Mpa

8. Power Supply: 220V ± 10% 50Hz

9. Power Consumption: 150W

10. Dimensions: 360mm x 190mm x 350mm

11. Sink Volume: ≥2.0L

12. Machine Weight: Approximately 13 kg