The SYD twin-motor hybrid mixer consists of a material drum, frame, reduction drive, and mixing blades. The working process is as follows: several materials to be mixed are fed into the horizontal twin-conical vessel via vacuum conveying or manual addition. The vessel is sealed, the equipment is started, and both the twin-conical drums and mixing blades rotate simultaneously. The rotating twin-conical drums cause the material inside the drum to be mixed and tumbled, while the high-speed rotating mixing blades break up clumped material, ensuring rapid mixing within the drum. The working process of the SYD twin-motor hybrid mixer has no dead corners or deposits, allowing the mixed materials to achieve a uniform and consistent blend quickly.
Principle:
The SYD dual-power mixer is a new, efficient, and precise container-rotating, blending type mixing equipment, designed for uniform mixing of various powdered and granular materials. It achieves a high degree of mixing, even for small quantities of additives. The machine is sealed to prevent powder leakage and boasts a long service life for its bearings. It features high mixing efficiency, moderate operational efficiency, low labor intensity, and ease of use. Suitable for industries such as magnetic powder, ceramics, chemicals, and feed.
Purpose:
Metal Powders: Aluminum, lead, zinc, copper, iron, nickel, alloys, magnetic materials, etc., in powder form.
2. Resin, plastics, rubber additives, dyes, pesticide fillers, and other chemical materials.
3. Food items designed to meet hygiene standards: flour, cocoa, coffee, seasonings, additives, etc.
4. West and East raw materials, pharmaceuticals, and traditional Chinese medicines designed according to GMPS specifications.
5. Selected grains, corn, beans, sesame, and other crops, husked and dehydrated.
6. Abrasives: glass beads, aluminum oxide, corundum, chlorine carbide, silicon carbide, quartz sand, and other grinding materials.
7. Feed processing powders, granules, additives, etc.
8. Raw material screening for fertilizers and fine screening of other finished products.
9. Various mineral raw powders and their processed finished products sorted by sieve.
10. Fibrous Materials: wood shavings, wood flour, charcoal, activated carbon, carbon black, and other fibrous materials.
11. Recycling of various materials and resources such as welding rod, refractory materials, and phosphorescent powder.
Features
(1) The machine is powered by an electric motor, with the drum and mixing blades driven by sprockets. The mixing blades and the material drum rotate in the same direction, featuring a simple structure, reliable transmission, and easy maintenance.
The double-conical筒 support bearing features dust-proofing with mechanical sealing, ensuring reliable sealing effectiveness. Powder material will not leak, and it will not cause rapid wear and destruction of the bearing due to material entering the bearing interior.
(3) The double cone hopper features a quick-open swing valve for feeding, and the discharge outlet is equipped with a large-diameter 90° swing valve, making it extremely convenient to use.
Note:
1. Materials with a bulk density greater than 1.5 require a special order.
2. The machine has excellent sealing, suitable for mixing liquid phase materials.
3. Customized spray or additive units as per customer requirements.
4. Can be customized into a vacuum drying machine as per customer's requirement.
