Graphitization FurnaceApplication Scope:
Hunan Aipu's graphitization furnace is used in the production of graphite thermal conductive films. These films offer excellent anisotropy and directional thermal conductivity.
Up to 1500 W/(m·K)Simultaneously Please provide the Chinese content to be translated.Low density, low thermal expansion coefficient, excellent mechanical properties, and good performance at high frequency (30MHz)AboveElectromagnetic radiation has high shielding properties.
The superior thermal shielding properties have recently made the emerging thermal materials a focal point. The production of graphitic thermal conductive films through graphitization furnaces holds vast commercial prospects. In aerospace,
There is also potential for heat dissipation in aviation electronics.
Graphitizing FurnaceCarbonization and graphitization experiments for various carbon materials.Pilot production；Can accommodate graphitization treatment for carbon materials.Graphitizing furnace with high operating temperature up to
3000°C, Operating Temperature2800°C. Capable of completing graphite purification process.
Graphitization FurnaceProduct Introduction：
1. Furnace body
1) The furnace features a vertical structure with an open top cover, utilizing a double-layer water-cooled design. The inner pot is made of 304 stainless steel with a cooling water passage in the interlayer. The furnace is capable of both vacuum pumping and protection gas introduction for operation.
2）The furnace is equipped with an exhaust port (for connection to a vacuum pump), electrode flange, infrared temperature measurement port, exhaust outlet, etc. The bottom base of the furnace is adjustable in height to accommodate different sensor heights.
3) The furnace lid features a manual hydraulic lifting and rotating opening method, offering easier and more labor-saving operation compared to manual wheel operation. The lid is equipped with an observation hole, a temperature measuring hole, and an air intake. (Hand-operated option is also available.)
Opening method of the rotating wheel operation).
4) The furnace is equipped with an insulating layer.Furnace crucible.Sensor, Corundum.
2、Sensor
The sensors are made of square copper tubes, featuring low magnetic leakage and high efficiency. The fixing strips for the sensors are made of stainless steel, ensuring no high-temperature carbonization occurs.Hunan Aipu.
3、Resonant capacitor
Resonant capacitors feature a water-cooled design, while also providing30% remaining stock.
4. Infrared Thermometer
Utilize an imported infrared thermometer to monitor the crucible temperature inside the furnace in real-time.Infrared temperature probes utilize imported dual-color infrared thermometers, which function effectively within the furnace with a certain amount of smoke.
Measurements can be extremely accurate even when dust and other particles obscure the target.
5、SureAir Acquiring System
Composed of a direct-connected mechanical pump, an inflatable solenoid vacuum valve, a vacuum butterfly valve, a diaphragm valve, and pipes.1 vacuum diaphragm valve for filling process gas, 1 for opening the furnace door
FillingAir breaks vacuum.
6、Electrical Control Systems
Temperature Control Instrumentation0.1% grade intelligent segmented program control regulator, featuring storage for 50 heating programs and optional communication port.Please provide the Chinese content you would like to have translated into American English.PLC Protection, capable of monitoring phase loss.
Water pressure, wiring, protective gas, vacuum pump, furnace temperature, cabinet temperature, etc., to ensure power supply, furnace body, cooling water, and protective functions.Sequential control and interlock protection for gas and other equipment
Protection features include early warning and alarm functions. The furnace water temperature exceeding 60 degrees will trigger an alarm. In case of water shortage in the vacuum unit, the operation will be delayed and stopped; failure to reach the vacuum alarm threshold.
Graphitizing FurnacePerformance Features：
1.High operating temperature, graphitization furnace can reach high operating temperatures3000°C, operating temperature 2800°C; capable of completing purification tasks for graphite.
2. The furnace body has excellent sealing, featuring a fully enclosed structure with a vacuum extraction system and an argon replacement system, which protects the purity of the gas inside the furnace.
3. Energy-saving and electricity-efficient, using electromagnetic induction heating technology, directly heating the graphite boat dish, with high thermal efficiency and energy conservation.
4.Rising rate up to600℃/h (cooling rate even faster)
5.Utilizing infrared temperature measurement technology,PID segmented program controls the heating curve. Temperature control is stable with minimal error.
6.High safety level, with double-layer stainless steel furnace shell, water-cooled in the interlayer, the outer shell temperature of the furnace is lower than50°C. Equipped with pressure, water pressure, and high-temperature alarms, and includes an overpressure venting device.
7. The furnace design fully draws on the design philosophy of foreign vacuum induction furnaces, integrating our company Hunan Aipu's technology into the foreign equipment.Decades of experience in high-temperature furnace production, enhanced furnace chamber
Please provide the Chinese content to be translated into American English.Insulation performance and temperature uniformity Reduced labor intensity in production, with all refractory materials used in the furnace being domestically produced, significantly lowering production costs.
Graphitizing FurnaceOptional Features:
1.High vacuum system:Vacuum systems include vacuum pumps, Roots pumps, diffusion pumps, molecular pumps, slide valve pumps, and butterfly valves; selection based on customer's vacuum degree requirements. Hunan Aipu provides you with...
Offer for professional selection.
2. Gas Purification System
3. Closed-loop cooling water system
4. Silicon Controlled Rectifier (SCR) Power Supply/IGBT Power Supply
