Description

It includes both with and without graphite. Particle sizes range from 1.0 to 1.5mm, 1.5 to 2.0mm, and 2.0 to 3.0mm. It melts and rapidly expands within the injection sleeve and at the top of the injection head, forming an excellent lubricating film inside the injection sleeve due to its capillary effect. It is easy to use and does not require the traditional spray systems with drop-coating pumps used for oil-based or water-based products.

Appearance: White, yellow, transparent (excluding graphite), granular.

Application Range: Injection sleeves with diameters ranging from 50-120mm; Black Granules: Contain graphite, spherical beads.
Density at 20℃: 0.5-0.7 cm³.
Application Range: For extrusion sleeves with diameters ranging from 50 to 160mm.

[Usage Instructions]

Add granules using a particle emitter to the casting chamber
Usage based on different punch diameters
60mm 0.4-0.5g
80mm 0.6-0.8g
100mm 1.0-1.3g
140mm 1.7-2.5g
150mm 2.2-4.0g
The determination of usage depends on the casting weight and requires experience-based trial and error.

【Advantages】

1. No contamination from general oil-based lubricants.
2. Reduce the occurrence of casting porosity.
3. Extends the service life of the plunger tube and reduces the adverse effects caused by friction.
4. The lifespan of the die-casting punch used in factory applications is generally doubled compared to using pure oil lubrication.
Increase the jet speed.
6. Complete consumption of particles during casting, with no contamination from lubricating oil.
7. Castings feature oil-free surfaces, clean and glossy.
8. When reusing gating systems, runners, and sprues, there should be no oil stains, smoke, or air pollution.
9. No wastewater treatment required, no need for water cooling systems and clean injection nozzles.
10. Highly economical usage, saving on costs.
11. Enhance process safety.