Product Features:
Easy to use, rapid location, high bonding strength, non-toxic cured material, and other advantages. After bonding, the workpiece features resistance to water, heat, cold, oil, and corrosion.
Application Range:
Widely used for bonding and repairing of materials such as PS, ABS, AS, HIPS engineering plastics, wood, paper, and other materials in craft products, toys, electronic product shells, etc.
Performance Parameters:
Color: Colorless Transparent Adhesive Liquid
Non-volatile matter: 85±1%
Viscosity: 200-300 cps
Shear resistance: PS-PS ≥ 50 kg/cm²
Drying Time: 3-6 mins
Operating Temperature: -20°C to 65°C
Instructions for Use:
Apply adhesive to a dry, oil-free bonding surface, single or double-sided, and immediately bond (no drying time allowed). Ensure tight contact. The adhesive will set in 5 minutes and achieve considerable strength in 2-3 hours.
The above performance data is a typical set obtained under laboratory conditions of 25℃ temperature and 70% humidity and is provided for customer reference only. It does not guarantee all data achievable in a specific environment. Please refer to test data for use.
【Cautionary Notes】
Flammable goods, store in a cool, well-ventilated area, and must be transported in accordance with flammable goods regulations.
Use with adequate ventilation and keep away from open flames. Always cover the adhesive after use to prevent solvent evaporation. If the JD-9286PS plastic adhesive is too thick, dilute it with a thinner.