Product Application:
Nine Card Instant Adhesive JD-403 is suitable for inert surfaces and bonding porous, acidic, and absorbent materials. It is a general-purpose, surface-insensitive adhesive that can be used for difficult-to-adhere surfaces, such as metals, plastics, leather, wood, cardboard, cork, ABS, PC, PVC, and P+R phone buttons.
Note: The above information is based on our current experience and ongoing, cautious testing results, and is for reference only. Please conduct a small-scale test before placing a bulk order.
User's Guide:
To achieve good bonding performance, the surface of the materials to be bonded should be clean and free of grease, rust, etc., kept dry, and cleaned using a cleaning agent.
Products are suitable for bonding in smaller gaps (0.05 mm).
If the bottle opening is too large or there is glue, first clean the glue with a soft cloth, then you can use the PE dropper after it. This helps control the glue flow and ensures the effectiveness of use.
A small drop of the subsequent adhesive is applied, followed by immediate bonding and kept until it hardens, with curing times ranging from a few seconds to several minutes. Practical strength is achieved within about 30 minutes, and higher strength is reached after 24 hours.
Cautionary Notes:
Do not wear gloves when applying the adhesive, as the high heat produced by the reaction between the gloves and the adhesive liquid can injure your hands.
Products should not be used in environments with pure oxygen or enriched oxygen, and cannot be used as sealing materials for strongly oxidizing substances.
Instant adhesive has a volatile irritant, please ensure good ventilation in the workplace when used in large quantities.
In case of a large amount of adhesive leakage, it can be solidified with water before scraping off.
Storage Conditions:
Keep out of reach of children and away from direct sunlight.
The ideal storage conditions for the product are in a cool, dry location with temperatures between 8-21°C, stored in the original packaging.
Products stored in the refrigerator should be brought back to room temperature before opening and using.
Avoid contamination of unused adhesives; do not pour any adhesive back into the original packaging.
