Product Features:
Easy to use, quick to locate, high bonding strength, non-toxic cured material, and other advantages. The bonded workpieces feature resistance to water, heat, cold, oil, and corrosion.
Application Range:
Widely used for bonding and repairing of materials such as PS, ABS, AS, HIPS engineering plastics, wood, paper, and other materials in crafts, toys, electronic product shells, etc.
Performance Parameters:
Color: Clear Transparent Liquid
Non-volatile matter: 85±1%
Viscosity: 200-300 CPS
Shear Resistance: PS-PS ≥ 50 kg/cm²
Drying Time: 3-6 mins
Operating Temperature: -20°C to 65°C
Instructions for Use:
Apply glue to the dry, oil-free adhesive surface, single or double-sided, and immediately bond (no drying time before bonding), ensuring tight contact. It takes 5 minutes to set and gains considerable strength in 2-3 hours.
The above performance data is the typical values obtained under laboratory conditions of 25℃ temperature and 70% humidity, and is for customer reference only. It does not guarantee all data achievable in a specific environment. Please use test data as the standard during operation.
[Important Notes]
Flammable goods, store in a cool, well-ventilated area, and must be handled and transported according to flammable goods regulations.
Use with adequate ventilation and keep away from open flames. Always seal the adhesive after use to prevent solvent evaporation. If the JD-9286PS plastic adhesive is too thick, dilute it with a thinner.