The exhaust silencer for blow pipes can be considered a component of the pipeline. After acoustic processing inside, it can reduce the generation and transmission of noise. The design of the silencer for steam blow pipes cannot solely focus on noise reduction. It must first meet the needs of the steam blow pipe, ensuring high flow rate, minimum resistance, and maximum momentum. Then, noise reduction is achieved through techniques such as pressure reduction, throttling, capacity expansion, and frequency shifting.

Boiler blowing pipe is a quick and easy method to eliminate residue from engineering left in the pipeline: The blowing process produces a tremendous noise of about 130-150dB, while a blowing pipe silencer can reduce the generation and transmission of noise, achieving a noise reduction of over 30-40 decibels (A-weighted) at the outlet, correspondingly lowering the loudness by more than 60%, resulting in a noticeable subjective effect.

Features

1. For the high steam temperature requirements during supercritical unit steam blowing, the materials selected for the inlet of the blowing pipe silencer and the first-stage throttle tube are 0Cr18Ni9, while the materials for the second-stage throttle tube and housing are 20g or 16MnR.

2. Suitable for harsh working environments; can contain water, ferrous debris (particle size up to ∮30mm), and engineering residues in the working medium.

3. Noise reduction up to 20dB-40dB(A). Suitable for (blowing methods): Constant Pressure Blower, Voltage Reduction Blower, Oxygen Enrichment Blower.

4. Design and manufacturing must comply with the technical specifications of GB150-1998 "Steel Pressure Vessels." To ensure the safe operation of the silencer, structural measures and requirements must be established and met, including strength, differential expansion, displacement, drainage, corrosion allowance, and protection against damage from solid debris. The quality of the silencer's manufacturing should be supervised and inspected by professionals from the design and supervisory authorities.

Design and manufacturing

1. The design of the blowpipe muffler body must have sufficient strength and rigidity to withstand the impact of high-speed steam flow carrying various debris (such as slag, oxide rust, silt, etc.). The muffler's strength, calculated according to 150-98 "Steel Pressure Vessels," requires additional safety margin to compensate for the special circumstances of this project, where various debris impacts the muffler at high speeds, which were not accounted for in the calculation method.

2. The support and connecting components of the muffler shell's blowpipe must have sufficient rigidity and strength. The structural design should be reasonable and capable of withstanding additional forces such as counterforce, thermal expansion thrust, torque, and vibration caused by high-speed airflow carrying debris. The muffler itself should be able to withstand various impacts brought on by temperature and pressure fluctuations. After multiple opening and blowing operations, the muffler should still maintain its overall integrity.

3. The material selection and welding of the blowpipe muffler should comply with the requirements of relevant specifications or standards.

Order Parameters

Please provide the following information when selecting a blowpipe silencer:

1. Blower steam pressure and temperature.

2. Tube connection bore and wall thickness.

3. Steam volume.