
Gaboon rubber sheet
Spec: 1.5-80mm x 500-2000mm
Density: 7 × 15/inch, 15 × 15/inch; Lamination: 1- several layers
Performance: Moderate pressure; strong tensile strength with minimal deformation.
Application: For manufacturing seals and rings, used in light conveyor belts, suitable for environments with high strength requirements.
Technical Specifications: Commonly Required Density: 1.4-1.6; Tensile Strength: 3.5 Mpa; Elongation: 200%; Hardness: 70°±5°
Thickness: Measure and inspect the thickness at five or more random points on the entire rubber sheet. A micrometer or an instrument of similar precision can be used for measurement. The accuracy of the micrometer should be within 0.02mm. The diameter of the measuring drill should be 6mm, and the diameter of the flat pressure foot should be (3.17±0.25)mm. The pressure foot should be capable of applying a pressure of (0.83±0.03)N. The insulating pad should be laid flat to ensure a smooth surface for micrometer measurements.































