PP Mesh DemisterAlso known as a wire mesh defogger, foam separator, or froth separator. Designed to separate droplets larger than 3-5μm from gas. As the foggy gas rises at a certain speed and passes through the filter wire mesh in the grid, the inertia of the droplets causes them to collide with the fine wires and adhere to their surfaces.The further dispersion of droplets on the fine wire surface and the gravitational settling of the droplets themselves cause them to coalesce into larger droplets that flow along the wire to its intersections. Due to the wettability of the fine wire, the surface tension of the liquid, and the capillary action of the fine wire, the droplets continue to grow until their own weight exceeds the combined force of the upward buoyancy of the gas and the surface tension of the liquid, at which point they are separated and fall. With the proper selection of operating gas velocity and other conditions, the de-dusting efficiency of the wire mesh de-duster can reach over 99%, achieving the goal of completely removing the droplets.
PP Mesh DemisterIn gas-liquid mass transfer and heat transfer unit operations such as distillation, absorption, desorption, and humidification (dehumidification), whether using packed towers or plate towers, the process relies on the close contact and sharing of two phases to promote the transfer of the same components, thereby achieving purification of liquids or gases, humidification (dehumidification), and other objectives. In the gaseous phase that leaves the packed bed or tower plates during these processes, a certain quantity of liquid droplets or mists of varying sizes is inevitably carried along: Subsequent cooling and refrigeration processes may also form microscopic particles suspended in the gaseous phase; when the system being treated is particularly complex, gas-phase chemical reactions between components may also generate even smaller particles.
Product Categories: Metal Mesh Skimmer, Plastic Mesh Skimmer, PP Mesh Skimmer, Drawer-Type Mesh Skimmer,嵌入式Mesh Skimmer, Top-Mounted Mesh Skimmer, Bottom-Mounted Mesh Skimmer, etc.
Shanghai Tianjiu Environmental Protection New Materials Co., Ltd. provides the following details on the production of tower internals:
Tower internals: vapor-liquid separator demister, mist collector, liquid collector, PTFE distributor, weir demister, spray nozzle, packing support grid, liquid redistributor, trough liquid distributor, ammonia water filter, hump support, packing support, supports, tubular liquid distributor, wire mesh demister, tower internals fittingsPVCDistributors, plastic baffle mist collectors, bubble cap trays, inlet pipes, floating valve trays, Johnson net pipes, circular bubble caps, ceramic distributors, removable slot tray gas-liquid distributors, pressure grids, and other tower internals.
Note: Non-standard tower internals can be manufactured according to customer-provided drawings, and design, manufacturing, and installation services for tower internals can be provided based on customer-specified parameters. Shanghai Tianjiu Environmental Protection New Materials Co., Ltd. has hired several doctors from major universities to serve as technical consultants for our factory, forming a technical department, and offers you professional technical services.
