Customized Environmental Protection Filler PP Material Slot DistributorEffectively reduces the space requirement of the distributor within the tower, featuring a compact structure and easy installation. The fully connected structure of the secondary slots enhances the distributor's anti-vibration capability. The primary distribution slot receives the liquid from the feeding liquid tube and performs initial liquid distribution to the secondary slots. Long strip liquid distribution boards are vertically placed on both sides of the secondary narrow slots.

Customized Environmental-Friendly Filler PP Material Slot DistributorAccepts liquid from the feed tube of the fabric liquid and distributes the initial liquid to the secondary tank. Vertical long strip fabric liquid plates are placed on both sides of the secondary narrow slots. Under the designed liquid load, the liquid flow per unit length at the bottom edge of the fabric liquid plate should be equal, and it is considered a high-level liquid distributor when the flow deviation is less than 6%. Clearly, at the lower load of 50%, intermittent fabric liquid distribution occurs, yet it is still superior to the distribution effect of the multi-point distribution. At the upper load of 120%, a phenomenon of parabolic liquid film overlap occurs on the fabric liquid plate where the liquid streams from adjacent small holes, with the liquid segment flow at the overlap being slightly higher, yet still better than the multi-point distribution.