Desulfurization tower with metal wire mesh frotherAvailable in two types: upper mounted and lower mounted. Choose the upper mounted mesh demister when the manhole is located above the defoamer or there's a device barrier even without a manhole; opt for the lower mounted mesh demister when the manhole is below the defoamer.Due to the wettability of the fine filaments, the surface tension of the liquid, and the capillary action of the fine filaments, the liquid droplets grow larger until their own gravity exceeds the combined force of the upward buoyancy of the gas and the surface tension of the liquid, at which point they are separated and fall.

Desulfurization tower with metal wire mesh frotherProduced in accordance with the Ministry of Chemical Industry standards, these are used to separate liquid droplets entrained in the gas within separation towers, ensuring mass transfer efficiency, reducing the loss of valuable materials, and improving the operation of the compressor after the tower. Generally, a wire mesh demister is installed at the top of the tower, primarily for gas separation, and can also act as an air purification filter.