Lithium-ion Battery Powder Automatic Compaction Density Gauge, Mold with Detachable Module
Principle:
Lithium-ion power batteries have a significant impact on battery performance during the manufacturing process, with the compact density closely related to the specific capacity, efficiency, internal resistance, and cycling performance of the battery.
Higher compaction density, the battery capacity can be made with automatic powder compaction density meter
The higher the value, the压实 density is also considered a reference index for the material's energy density.
Automatic Lithium Battery Powder Compaction Density Meter with Mold Self-removing Module
Application Scope:
During the compression process by external forces, as the powder moves and deforms, larger voids are filled, the contact area between particles increases, causing an attraction between atoms and strengthening the mechanical wedging between particles, thereby forming a dense and strong compact..
Reference Standard:1.GBT 24533-2009 Lithium-ion battery graphite anode materials, AppendixL:Testing Method for Powder Compaction Density
2.GB∕T 24533-2019 Lithium-ion battery graphite anode materials
Also suitable for the determination of compacted density of powders and granules with similar characteristics.
Function Description:
Hydraulic measurement system employed.7An inch touchscreen andPCSoftware control, the load unit control system collects stress change data, pressure and time data can be set, displacement is directly read by the displacement sensor, temperature and humidity data are obtained through sensors, multi-bit chip data analysis, automatic mode, manual operation mode available; Standard equippedPCThe software provides curves showing the relationship between stress and powder density; time and powder yield strength; as well as analysis and graphical representations of process data. This helps production enterprises and research institutions establish data models for developing and improving processes..Offer both Chinese and English versions.
Lithium-ion Battery Powder Automatic Compaction Density Gauge, Mold with Detachable Module
Parameters and Specifications
Test Items | FT-100F | FT-100H | |
1.Main Pressure (Select) | 5ton(s)10tons20ton | 2ton; 3ton; 5ton | |
2.Displacement Measurement | Position Sensor System,Resolution0.001mm | ||
3.Stroke | 0-20mm | ||
4. Control System | Hydraulic Control System | Servo Power System | |
5.Display Method | 7Inch touchscreen+PCSoftware | ||
6. Mold (optional) | A.Standard ConfigurationInternal Diameter:13mm； B.Optional inner diameter12.8mmHigh:25mm；Accuracy0.01mm | ||
7.Molding release method | Automatic | ||
8.Protective Device | Automatic diagnostics, overload protection, and emergency stop control | ||
9.Temperature and humidity range | Room Temperature-50Temperature; Humidity:20%-98% | ||
10.Time Setting | 0-99.9S ；0.1S | ||
11.Equipment Management Function | PermissionSetup and Data Management Storage | ||
12.Density Value | 99.99999g/cm3 | ||
13.Deformation variable | Measurable deformation of elastic materials0.01%----50% | ||
14.Balance (Select) | 0.00001gRange:120g | ||
15.Displacement Speed | Less than15mm/minResolution0.1mm/min | ||
16.Environmental Requirements | Instrument Usage Environment Requirements: Operating Temperature:-10℃－40Temperature: ℃, Humidity: ≤65%RH | ||
17.Power Supply | 380v | ||
18. Overall Error | Samples vary in characteristics and density.≤3% | Different samples have varying characteristics and densities.≤1% | |
19.Selection Items | a. Extended Warranty Service; b. Measurement Services; c. Computers and Printers | ||
