Pulsarlube V125 gas is an automatic lubricator for laser cutting machine racks and automatic oil injection pump.
Comparison of Manual Greasing vs. Automatic Greasing
Traditional Lubrication Method:
I. Labor
1. Man-hour consumption.
2. Inadequate manual lubrication.
II. Monetary Matters:
Increase the cost of purchasing oils.
2. Increased equipment wear due to improper lubrication.
3. Increase equipment upgrade and maintenance costs.
4. Reduce production value.
Automatic Lubricator Lubrication Method:
I. Labor:
1. Reduces labor hours.
2. Oils can be supplied to the equipment on a timed and measured basis.
Money:
1. Reduce oil procurement.
2. Maintenance equipment costs can be reduced.
3. Increase equipment reliability.
4. Reduce equipment maintenance time.
Increase production capacity.
6. Accelerate equipment automation.
Under the globalization competition, the reliability of equipment is a key factor in a company's competitiveness. Increasing production value means increasing profits, which is why regular maintenance and repair of equipment are crucial. Among these, proper lubrication is of utmost importance, as it can reduce equipment wear and tear, thereby cutting down on maintenance costs. This, in turn, can lower a company's operating capital, allowing for more funds to be invested in the company's operations, generating greater profits. Therefore, using an automatic lubricator not only saves costs but also generates revenue, symbolizing a company's progress. How should we determine the lubrication amount for the bearings on our equipment? Firstly, you can consult the lubrication guidelines provided by the bearing supplier, or refer to the following simple setting table.
Axle Diameter - Pulsarlube Setting Time - Manual Lubrication Cycle
> 105mm, 1-2M per every 1-2 days, lubricate once every 1-2 days
88-105 mm, 2-3 M, lubricate every 3-4 days
79-87 mm, 3-4 M, lubricate once a week
63-78 mm, 4-6 M, lubricate once a week
49-62 mm, 6-8 M, lubricate every other week
35-48 mm, 8-10 M, lubricate once a month
<35mm, 10-12M, lubricate monthly
When the operating temperature exceeds 70°C, the lubricating grease must be doubled for every 15°C increase. 2. When the bearing is contaminated, such as with dust, moisture, acidic or alkaline environments, the lubricating grease must also be doubled. 3. When the bearing load is heavy, such as with vibration or pressure, the lubricating grease must be doubled as well. If the operating conditions have all of the above, then the fresh grease must be replenished in an even greater amount to ensure lubrication quality. The bearing should have adequate space internally to allow for the expulsion of excess grease during startup, and since grease has a shelf life, regularly replenishing fresh grease to expel contaminated grease will allow the bearing to maintain its quality and lifespan.
Pulsarlube V Automatic Grease Injector
Pulsarlube V Automatic Greasing Injector (Pulsarlube V Electrochemical Single-Point Lubricator). A single-point lubricator is a device used to extend the life of bearings during the production process.
Pulsarlube V is a type of electrochemical, automated single-point lubricator, designed to ensure a predictable and fresh supply of lubricant in industrial applications. Shenzhen Sanhe Boda is an authorized distributor of Pulsar, sourcing directly from the factory for affordable prices, comprehensive after-sales service system, and easy operation. Our commitment to customer satisfaction is our driving force. The Pulsarlube V model is suitable for underwater operations, maintains a consistent oil level, is disposable, and is quite affordable.
The Pulsarlube V automatic grease applicator delivers its (pre-filled) lubricant by means of a controlled reaction that generates inert nitrogen gas under pressure. It fills lubricators with combustible hydrogen (hydrogen gas) through a metal/acid reaction, different from traditional gases. Pulsarlube V utilizes inert nitrogen gas controlled by a microprocessor, similar to the technology used in vehicle airbags for safety.
Features of Pulsarlube V Automatic Greaser:
Built-in microprocessor for reliable logic circuit operation, easily submersible lubricator with variable allocation rate of 1-12 stages.
1-12 month users have a good LCD large screen, which can be reset at any time to make the transparent container easy for visual inspection of the outlet.
Thread: 3/8" M
Dimensions: 125cc - 97mm (3.81") x 134mm (5.27") | 250cc - 97mm (3.81") x 152mm (5.98")
Remote Installation: 1m
Pulsarlube V Automatic Grease Injector Instructions:
Operating Temperature: -20°C to 55°C
Work Pressure: 5KG
Lubricant Capacity: 125cc / 250cc
Explosion-proof rating: Ex ia IIC T4/IP54 Pulsarlube V is permitted for use in hazardous areas with 5 standard lubricants (multi-purpose / high-speed / food-grade / high-temperature)
Model: KLT500/KLT1000
Pulsarlube V Automatic Grease Injector Application:
General applications include: ○ Areas hazardous or not suitable for entry ○ During contamination ○ When lubricator personnel are insufficient Pulsarlube V automatic grease injection system for rack lubrication. Laser cutting machine rack lubrication container.
