Siemens ET200S, Siemens modules, Siemens ET200 - power management module for electronic modules and motor starters, providing and monitoring load and sensor voltages; Siemens ET200S, Siemens modules, Siemens ET200 monitor voltages, fuse failure; LED indicator lights display voltage and fuse status; available in various types (AC, DC, PROFIsafe) for selection. Terminal modules provide electrical and mechanical connections for I/O modules and signal lines. Screw terminals, spring terminals, and quick-connect terminals that can pierce the insulation layer directly are available. Siemens ET200S, Siemens modules, Siemens ET200.

Power management module for electronic modules and motor starters, providing and monitoring load and sensor voltages; monitoring voltages and fuse failures; LED indicator lights display voltage and fuse status; with various types (AC, DC, PROFIsafe) available for selection.

Terminal Module

Electrical and mechanical connections provided for I/O modules and signal lines. Screw terminals, spring terminals, and quick-connection terminals that can pierce through the insulation layer directly are available for selection.

Electronic Module

Supplying input/output and various functions for ET 200S

Digital Input Module

• 2-, 4-, and 8-channel

• Multiple Functions: Standard, High-Performance, Source Input, PROFIsafe

Digital Output Module

• 2-, 4-, and 8-channel

• Multiple Functions: Standard, High Performance, Relay, Leak Type Output, PROFIsafe

Analog Input Module

• 2- and 4-channel

• Input of current and voltage, thermocouple and resistance temperature detector (RTD) measurement

• Multiple Functions: Standard, High-Performance, High-Speed

Analog Output Module

• 2-channel

• Current and voltage output

• Multiple Functions: Standard, High Performance, High-Speed

IO-link

I/O-lThe main station module of the ink system provides 4 I/Os.Ink channel, for intelligent IO-1The ink equipment is connected to the ET200S. The ET 200S features IO-l.The ink functions can all be connected to the PROFIBUS DP or PROFINET I/O master station. The configuration tool integrated in STEP 7 makes the IO-lData processing for ink components is more simplified. Plus 4 sensors, actuators, or other IOs.Ink equipment can be connected to a single standard cable. In comparison to centralized parameterization, the IO in SIMATIC S7 is designed for...ink can extend diagnostic functions to the device level.

Relay Module

When connecting actuators, including electromagnetic or hydraulic valves, DC contactors, and indicator lights—loads that typically require high currents—you will need relay modules. Fault-type relay modules are also available.

Reserved Module

One slot is reserved for the electronic module. The reserved module is not connected to the TM-E terminal module's terminals, thus the TM-E terminal module can be wired according to function for future use.

Function Module

High-performance function modules can achieve various process functions. These modules can complete most functions, thus significantly reducing the CPU's workload. They can be directly applied on-site, such as for counting, measurement, positioning, and serial communication tasks. Configuration can be done using STEP 7 or GSD files.

Measurement Module

SIWAREX CS is a weighing system for the ET 200S distributed I/O system, featuring calibration capabilities. The SIWAREX CS weighing module can be applied to a variety of measurement tasks, such as container weighing, filling level measurement, platform weighing, lifting measurement, and force and torque measurement.

The SIWAREX CF is a measurement module for connecting strain sensors. It can be applied to various tasks, such as measuring pressure and torque.