Silicone heat-resistantFacialLacquer
Product Introduction:
This productComposed of organosilicone resin, ultra-fine moisture-resistant pigments, special moisture-resistant and anticorrosive fillers, additives, organic solvents, etc.
Key Parameters:
Project | Basic Parameters | Project | Technical Specifications |
Film color | Silver, Grey, Black | Dry Film ThicknessDegree | 35μm/Please provide the Chinese content you would like to be translated into American English. |
Film appearance | Flat and semi-gloss finish | Wet Film Thickness | 80μm /Please provide the Chinese content to be translated. |
Packaging Specifications | Drum packaging 20kg | Theoretical Coating Rate | 110g/㎡ |
Temperature Resistance Range | 400℃-700℃ | Adhesion | 2Grade |
Solid Content | ≥70% | Impact Strength（kg.cm） | ≥35 |
Drying Time | （25℃Drying Table≤2h Down-to-earth≤24h Fully cured 7d | Probationary Period23±2℃ ） | 3h |
Recoat Interval | 4h | Diluents and Dosage | 10--20% |
Viscosity （s） | 50—100 | Heat-resistantSex（5h） | Slight dulling and color change in the coating |
