Horizontal Shaft Sand Maker Product Introduction

The Vertical Axial Vibration Sand Making Machine is a new product developed by our company through optimized design by combining domestic and international fine crushing technologies. Its performance has reached domestic standards and is used for crushing various medium-hard ores, widely applicable in industries such as mining, metallurgy, refractories, cement, coal, glass, ceramics, and power. The Vertical Axial Vibration Sand Making Machine features a large crushing ratio, adjustable discharge particle size,不受paddle and liner wear impact, no screen bar setup, and is not prone to clogging when processing materials with high moisture content and clay.

Vertical shaft variable-frequency sand-making machine,简称Vertical shaft crusher, is one of the commonly used equipment in crushing production lines and sand-making production lines. Main applications: This series is suitable for crushing limestone, clinker, coal, and other ores in the construction materials, mining, metallurgy, and chemical industries, with compressive strength not exceeding 140 MPa and humidity not exceeding 15%.
Advantages of Vertical Shaft Impact Crusher

This equipment boasts a high crushing ratio and high yield, 1.4 times that of similar domestic products. It has the ability to crush hard materials such as shale, glass, ceramics, river pebbles, granite, basalt, iron ore, slate, and metal ores, especially in the application of crushing for manufactured sand and stone materials as well as metal ores. Wear parts are made of high-hardness, high-toughness, multi-alloy abrasion-resistant materials, extending the lifespan by 2-3 times. The gap between the hammerhead and the impact plate is adjustable to meet the crushing requirements of various materials.

Vertical shaft sand making machine manufacturer
1. The heavy-duty vertical shaft sand making machine has a high crushing ratio and no screen strips, making it less prone to clogging when processing materials with high moisture content and high clay content.
2. Horizontal bearing arrangement, long service life, capable of handling high-temperature materials like cement clinker.
3. Equipped with an elastic regulating mechanism, non-breakable objects can be automatically discharged, preventing damage to the equipment.

4. The machine features a rotor body structure, which experiences minimal wear when processing materials. Additionally, the rear chamber is equipped with a screw or hydraulic opening mechanism, allowing for easy replacement of wear parts without the need to activate the main equipment.

Vertical shaft sand making machine composition structure
The lumpy ore falls into the upper crushing cavity from the feed hopper and is thrown towards the inner wall of the drum by the centrifugal force of the discharge disk. It collides violently with the impact plate mounted on the inner wall, while the ore pieces collide with each other, causing them to break or develop numerous hairline cracks. Subsequently, the ore enters the conical rotor cavity and spirals downward in the conical space, further破碎 due to the pressing and squeezing, as the pre-existing cracks in the ore are widened. The slanting angle between the conical rotor and the liner promotes the downward migration of smaller particles, achieving automatic sizing and crushing from large to small. Inside the conical rotor cavity, the ore is struck by hammers, and the high-speed moving lumps collide with the impact plate and with each other, leading to blows, impacts, shearing, and squeezing, thereby粉碎ing the ore and enhancing the crushing efficiency.

Horizontal shaft sand making machine technical parameters