Integrated Water Purification Equipment

Zhenyuan Series Chlorine Dioxide Generator Performance Features                                                                                                                                                                                    

ØTo fully extend the reaction time of raw materials, enhance the chlorine dioxide content, and improve the conversion rate of raw materials, domestic industries in the same field use a five-stage reactor. The reaction time of raw materials in the reactor is1.95Hours, Total Material Conversion Rate ≥90Chlorine dioxide accounts for a portion of the total available chlorine.70－80％。

ØDomestic dry heating methods feature quick temperature rise and low power consumption, demonstrating significant energy savings compared to products in the same industry..

ØDomestic direct measurement reactors actually measure the internal reaction temperature, not the medium temperature. Temperature control:45℃-50℃。

ØDual-temperature control system designed for large equipment, maintaining a high raw material conversion rate for use in cold regions.

ØThe use of a residual separator can enhance the purity of water intended for drinking.

ØMaterial输送 employs imported electromagnetic metering pumps, ensuring stable operation, accurate and reliable measurement.

ØThe internal reactor of the equipment is made of high-temperature and corrosion-resistant synthetic metal materials or pure titanium, ensuring a long service life for the equipment.10Over one year.

ØSelf-developed and produced chlorine dioxide generator controller, integrating temperature control, frequency adjustment, flow control, residual chlorine control, and logical control into one, making the equipment more user-friendly and convenient for selection.

ØTemperature control is utilized.PIDTechnology for temperature control. Set temperature cut-off feature to prevent losses due to temperature runaway.

ØThe controller features logical control functions: only when the dynamic water pressure and two level conditions are met, the equipment can start heating and operate normally.

ØOperation: The specially designed explosion-proof device features a reversible function, which can effectively release excessive pressure inside the reactor and quickly recover on its own.

ØBased on customer selection meets20Tanks for raw materials storage for 1 day or more; continuous level measurement for large raw material tanks is available, with remote transmission capability.

ØEasily facilitates the automation of equipment operation processes. Very simple to achieve联动 control with the equipment you require.

ØA sound installation ensures no presence of chlorine dioxide or corrosive gases indoors, with no noise and leakage pollution.

Detailed description of performance features:

1.Sodium chlorateNaClO3And hydrochloric acid (concentration ≥)31Produced primarily from chlorine dioxide and supplemented with chlorine gas, this compound disinfectant is manufactured using % as raw material.

2.The Zhenyuan equipment fully utilizes the working principle of the water jet to create negative pressure. The reactor inside the equipment is always under a negative pressure state. Moreover, due to the entry of air, the raw materials are continuously aerated. The chlorine dioxide gas produced in each reactor is continuously extracted, resulting in higher levels of chlorine dioxide, calculated by the effective chlorine content.ClO2Concentration exceeding70。

3.To fully extend the reaction time of the raw materials, increase the chlorine dioxide content, and enhance the conversion rate of the raw materials, the equipment utilizes a five-stage segmented reactor. Equipment yield ≥90Chlorine dioxide accounts for a portion of the total available chlorine.70－80％。

4.Domestic five-level reactor, with raw materials remaining in the reactor for1.95Hours, ensuring the raw materials are fully reacted within the reactor, thus guaranteeing a high yield of the reaction.90Above.

5.Five-stage Reactor Mechanism: Sodium chlorate and hydrochloric acid react at room temperature to produce a significant amount of chlorine dioxide gas, with a low conversion rate of raw materials. Therefore, in the first four stages, the reaction is carried out to fully extract a large amount of chlorine dioxide gas. Starting from the fifth stage, the temperature is increased to ensure a sufficient reaction of raw materials, with more chlorine and less chlorine dioxide. This ensures an improved conversion rate of raw materials and a higher proportion of effective chlorine as chlorine dioxide.

6.The equipment utilizes dual temperature control technology to enhance raw material conversion rates, which can increase the conversion rate of raw materials by75Above. The specific method involves using a water bath heating for the first four reactors, heating them to30～40°C, the fifth level uses dry heating up to45～50℃。

7.The equipment is enhanced with a waste liquid treatment system, which can discharge the small amount of unreacted residues.

8.Due to the full reaction of the raw materials, the concentration of chlorates in the disinfected water bodies is significantly reduced, meeting the national drinking water standards: chlorates are below0.7ppm。

Automatic temperature control, temperature control45-50The equipment utilizes a combination heating system with water bath heating as the primary method and air heating as the auxiliary. Currently, domestic hypochlorous acid generators of the vacuum type all employ an external air blowing-off process to extract chlorine dioxide from the reaction liquid, which is then absorbed by a water jet to produce disinfectant. This process has a flaw: the actual temperature inside the reaction chamber does not reach the required reaction temperature. This is because the equipment's operation...(Especially during the winter)Outdoor temperatures are generally0Below °C, during the blowing-off process, the outdoor cold air significantly lowers the temperature of the reaction liquid in the reactor, preventing the reactor from reaching the required temperature, which greatly reduces the conversion rate of the raw materials in the generator. In response to this actual usage scenario, our company has innovated through technology by adding air-assisted heating at the equipment's intake port, pre-heating the cold air before blowing-off, thereby avoiding the aforementioned issues. This air-assisted heating can achieve automatic temperature control, ensuring that the air blown into the system remains at a constant temperature regardless of the outdoor temperature.40℃, which ensures the reaction temperature inside the reactor, maintaining a constant temperature throughout the year. This is a highlight and unique feature of our generator compared to similar products. This technology has been applied for a national invention patent by our company. Additionally, due to the rapid heat exchange in the reaction drum, it significantly reduces the service life of the reactor. This device effectively overcomes...