Integrated Water Purifier

Zhenyuan Series Chlorine Dioxide Generator Features                                                                                                                                                                                    

ØTo fully extend the reaction time of raw materials, enhance the chlorine dioxide content, and improve the conversion rate of raw materials, domestic peers in the industry use a five-stage reactor, with the reaction time of raw materials in the reactor being1.95Hours, Total Raw Material Conversion Rate ≥90Chlorine dioxide accounts for a portion of the total available chlorine.70－80％。

ØDomestic dry heating methods feature quick temperature rise and low power consumption, demonstrating significant energy savings compared to products in the same industry..

ØDomestic direct measurement reactors actually measure the internal reaction temperature, not the medium temperature. Temperature control:45℃-50℃。

ØDual temperature control system designed for large equipment, maintaining a high raw material conversion rate for use in cold regions.

ØThe use of a residual separator can enhance the potability of the water.

ØMaterial conveyance utilizes imported electromagnetic metering pumps, offering stable operation, accurate and reliable measurement.

ØThe reactor inside the equipment is made of high-temperature and corrosion-resistant synthetic metal materials or pure titanium, ensuring a long service life for the equipment.10Over one year.

ØSelf-developed and produced chlorine dioxide generator controller, integrating temperature control, frequency adjustment, flow control, residual chlorine control, and logic control into one unit, making the equipment more user-friendly and convenient for customer selection.

ØTemperature control is utilizedPIDTechnology, temperature control. Set temperature cutoff function to prevent loss due to temperature out of control.

ØThe controller features logical control functions: the equipment can only start heating and operate normally when the power hydraulic pressure and two liquid level conditions are met.

ØOperation: The specially designed explosion-proof device features a reversible function, capable of effectively releasing excessive pressure within the reactor and quickly restoring itself.

ØBased on customer selection meets20Tanks for raw materials storage for up to several days; continuous level measurement for large raw material tanks is available, with remote transmission capability.

ØEase the process of automating equipment operations. Extremely easy to achieve联动 control with the equipment you require.

ØA good installation pattern ensures the absence of chlorine dioxide or corrosive gases indoors, as well as noise and gas leakage pollution.

Detailed description of performance features:

1.Sodium chlorateNaClO3Hydrochloric acid (concentration ≥31A composite disinfectant primarily producing chlorine dioxide and supplementary chlorine gas, with (%) as raw material.

2.The Zhenyuan equipment fully utilizes the working principle of the water jet creating a vacuum. The reactor inside the equipment is always under a vacuum state, and due to the entry of air, the raw materials are continuously aerated. The chlorine dioxide gas produced in each reactor is continuously extracted, resulting in a higher yield of chlorine dioxide, calculated by the effective chlorine content.ClO2Content greater than70。

3.To fully extend the reaction time of raw materials, enhance the chlorine dioxide content, and improve the conversion rate of raw materials, the equipment utilizes a five-stage segmented reactor. Equipment yield ≥90Chlorine dioxide accounts for a portion of the total available chlorine.70－80％。

4.Domestic five-level reactor, raw material residence time in the reactor reaches1.95Hours, to ensure that the raw materials fully react within the reactor, thus ensuring a high reaction yield.90Above.

5.Five-stage Reactor Mechanism: Sodium chlorate and hydrochloric acid react at room temperature, producing a significant amount of chlorine dioxide gas, with a relatively low raw material conversion rate. Therefore, the first four stages are used to fully extract a large amount of chlorine dioxide gas. Starting from the fifth stage, heating is applied to ensure full reaction of the raw materials, at which point there is more chlorine and less chlorine dioxide. This ensures an increased raw material conversion rate and a higher proportion of effective chlorine as chlorine dioxide.

6.The equipment employs dual temperature control technology to enhance raw material conversion rates, thereby increasing the conversion rate of raw materials by75The above. The specific method involves using water bath heating for the first four reactors, heating them to30～40°F, the fifth level utilizes dry heating up to45～50℃。

7.The equipment is enhanced with a residual liquid treatment system, which can expel the minor unreacted residues.

8.Due to the full reaction of the raw materials, the concentration of chlorates in the disinfected water bodies is significantly reduced, meeting the national drinking water standards: chlorates below0.7ppm。

Automatic temperature control, temperature control45-50The equipment employs a combination heating system primarily using water bath heating with auxiliary air heating. Currently, domestic vacuum-type chlorine dioxide generators all utilize an external air blowing-off process to remove chlorine dioxide generated from the reaction liquid, which is then absorbed by a water jet to produce a disinfectant solution. However, this process has a flaw: the actual temperature inside the reaction vessel does not reach the required reaction temperature. Due to the operation of the equipment at(Especially during winter)Outdoor temperatures are generally0Below °C, during the blowing-off process, the outdoor cold air significantly lowers the temperature of the reaction liquid in the reactor, preventing it from reaching the required temperature, thereby greatly reducing the conversion rate of the raw materials in the generator. In response to this actual usage scenario, our company has innovated through technology by adding air-assisted heating at the intake of the equipment, pre-heating the cold air before blowing-off, thus avoiding the aforementioned issues. This air-assisted heating can achieve automatic temperature control, ensuring that the air blown into the system remains at a constant temperature regardless of the outdoor temperature.40℃, which allows for maintaining a constant reaction temperature inside the reactor throughout the year. This is a highlight and unique feature of our generator compared to similar products. This technology has been applied for a national invention patent by our company. Additionally, due to the rapid heat exchange in the reaction vessel, it significantly reduces the service life of the reactor. This device effectively overcomes...