Product Details
Jiangsu Jidingda Environmental Protection specializes in: sand and stone selection powder machines, three-separation vortex selection powder machines, sand and stone compound selection powder machines, fly ash selection powder machines, and twin-rotor selection powder machines.
价 格Negotiable
最小起订0 piece库存0 piece
Business Card
Negotiable
Negotiable
Negotiable
Negotiable
JND Coal Mill Dynamic Classifier
Negotiable
Self-powered sand and gravel sepa
Negotiable
Stone Powder Separator, Calcium P
Negotiable
Horizontal electrostatic precipit
Negotiable
Fly Ash Classifier
Negotiable
Sand and gravel selection mill
Negotiable
Sifter
Negotiable
Grinding Mill for Slag Selection
Negotiable
Calcium Powder Sifting Machine
Negotiable
Dust Collector
Negotiable
The vertical guide vanes enter the second-class selection zone. The dusty airflow, under the strong and stable plane vortex formed by the rotating cage rotor, causes the medium and coarse powder to lose kinetic energy after being thrown towards the vertical guide vanes by centrifugal force, and falls into the medium and coarse powder collection cone, then排出 through the medium and coarse powder pipe. The fine powder that meets the requirements passes through the cage rotor and enters its interior, follows the circulating air into the high-efficiency low-resistance cyclone separator, and then slides into the fine powder collection cone to become finished product.
Technical Specifications
Model | Product fineness R0.045(%) | Handle air volume （m3/h） | RPM （rpm） | Motor Power （kw） | Large processing capacity （t/h） | Output Volume （t/h） |
TS-Ⅰ(N250) | 5～15 | 16000 | 250～500 | 15 | 54 | 10～18 |
TS-Ⅱ(N350) | 2～5 | 22000 | 220～450 | 18.5 | 90 | 15～28 |
TS-Ⅲ(N500) | 2～5 | 30000 | 180～400 | 22 | 120 | 20～40 |
TS-Ⅳ(N750) | 2～5 | 45000 | 160～340 | 30 | 150 | 30～45 |
TS-Ⅴ(N1000) | 2～5 | 60000 | 130～300 | 37 | 210 | 40-70 |
TS-Ⅵ(N1250) | 2～5 | 75000 | 130～260 | 37 | 250 | 50～85 |
TS-Ⅶ(N1500) | 2～5 | 95000 | 120～240 | 45 | 330 | 75～110 |
TS-Ⅷ(N2000) | 2～5 | 120000 | 110～200 | 55 | 390 | 95～130 |
TS-Ⅸ(N2500) | 2～5 | 150000 | 110～180 | 75 | 480 | 110～160 |
TS-Ⅹ(N3000) | 2～5 | 180000 | 120～240 | 110 | 550 | 130～190 |
TS-Ⅺ(N3500) | 2～5 | 210000 | 120～240 | 132 | 700 | 170～240 |
TS-Ⅻ(N4000) | 2～5 | 240000 | 120～240 | 160 | 850 | 220～280 |
TS-ⅩⅢ(N4500) | 2～5 | 270000 | 120～240 | 200 | 1000 | 260～300 |
Factory production details in real-time shot
1. The turntable is made of imported composite wear-resistant steel plate, offering 10 times the wear resistance of ordinary steel plates.
2. Graded blade gap is finely adjusted according to the selection of the powder requirements.
3. The static wear-prone areas of the selection room and selection tube are lined with imported wear-resistant ceramic tiles.
Phone Consultation