Wuhan Industrial Park Factory Building Inspection and Appraisal One-Stop Service

Wuhan Industrial Park offers a one-stop service for industrial factory building inspection and appraisal. Preparations for the safety inspection of Wuhan factories include:

1. Clearly define the project's inspection objectives and requirements, conduct on-site surveys of the factory, communicate with relevant personnel, and initially understand the factory's characteristics and the difficulty of the inspection implementation.
2. Due to the lack of structural design drawings and the inaccuracy of the construction contractor, on-site surveying will be conducted. Restore the architectural structure of the factory building. Factory surveying: Survey the architectural structure of the factory on-site to restore the architectural structure diagram. Overall deformation measurement: Use a level to measure the relative elevation differences of the exterior wall plinth line, window sills, or other horizontal lines, and the floor level, to get a macro understanding of the uneven settlement condition of the factory; Use a total station to measure the tilt condition of the vertical edges of the factory's exterior wall.

3. Wuhan Industrial Factory Building Inspection Report: Comprehensive inspection of factory damage conditions, including cracks and deformation in load-bearing components, damage to decorative layers, and strength testing of anchor bolts. Check the connection between anchor bolts and the ground for looseness, deformation, detachment, misalignment, shearing, delayed fracture, and other damage conditions. Record the damaged areas, scope, and severity in text, photos, and diagrams, distinguishing between structural and non-structural damage. Additionally, communicate with relevant units to inquire about the history of factory renovation and confirm the current load conditions of the factory.

4. Material Strength Inspection: On-site sampling tests should check the main load-bearing components of the factory, focusing on areas prone to dust and water accumulation, as well as corrosion conditions affected by alternating dry and wet conditions. Hidden damage and rusting should be included in the inspection scope. Rusting on components, joints, and connections should be investigated for the depth of rust or the extent of reduced plate thickness, as well as the condition and extent of rust pits and decay. To understand the quality of the factory's construction and ensure safety and normal operation, regular safety inspections should be conducted, with corresponding treatment recommendations made based on the actual situation, and a written consultation report provided.

Factory Appraisal Process:
(1) Accept entrusted matters.
(2) Conduct an investigation to understand the history and current status of the factory.
(3) Conduct on-site inspections, testing, and record various damage data and conditions;
(4) Verify and reconcile; organize technical documents.
(5) Analyze, argue qualitatively, make a comprehensive judgment, and propose handling suggestions.
(6) Issue certification documents