Product Details
Building Engineering Quality Inspection and Appraisal
价 格Negotiable
最小起订0 piece库存0 piece
Business Card
Negotiable
Negotiable
Negotiable
Negotiable
Engineering Surveying
Negotiable
Stage inspection
Negotiable
Tower Inspection
Negotiable
Penetration Testing
Negotiable
Property Condition Assessment
Negotiable
Residential Seismic Evaluation
Negotiable
Gamma Ray Inspection
Negotiable
House safety inspection and certi
Negotiable
Construction Adjacent Impact Hous
Negotiable
Roof Load-bearing Capacity Testin
Negotiable
Main Load Testing Content
Gather construction documents and design plans, as well as geological survey reports related to the property.
2. Conduct random inspections of concrete strength for columns, beams, and slabs according to national standards.
3. Conduct sampling inspections in accordance with the national testing specifications to check the steel reinforcement configuration of the columns and the thickness of the protective layer for the steel bars.
4. Inspect the cross-sectional dimensions of the column beams and the thickness of the floor slabs.
5. Inspect the quantity, current condition, and distribution of structural cracks in the house.
6. Conduct inspections to determine the quantity, current status, and distribution of cracks in the building's walls.
7. Conduct timely detection and analysis of potential uneven settlement of the building.
8. Inspect the entire house for any tilting and the extent of the tilt.
9. Based on the test results, national standards, and the actual usage conditions of the factory, conduct relevant calculations and analyses to determine the building's load-bearing capacity and structural safety, and provide recommendations for safe building usage.
Load-bearing testing, refer to relevant specifications.
1. "Standard for Reliability Appraisal of Industrial Buildings (GB50144-2008)"
"2. 'Standard for Evaluation of the Condition of Buildings' [City Living Letter (84) No. 678]"
"Standard for Identification of Hazardous Buildings (JGJ125-99 2004 Edition)"
4. "Technical Code for Reinforcement Detection in Concrete (JGJ/T152-2008)"
5. "Technical Code for Concrete Strength Testing by Core Sampling" (JGJ/T8-2007)
6. "Technical Code for Testing Concrete Compressive Strength by Rebound Method (JGJ/T23-2011)"
7. "Method for Evaluating the Strength Grade of Sintered Common Bricks Using a rebound hammer" (JC/T796-2013)
8. "Technical Code for Testing Compressive Strength of Masonry Mortar by Penetration Method (JGJ/T136-2001, J131-2001)"
9. "Technical Code for Comprehensive Ultrasonic Rebound Method for Concrete Strength Testing" (CECS 02: 2005)
10. On-site inspection and test results
Phone Consultation