Self-propelled sweeper

QY-XQ-W Series - Self-powered Rotating Sweeper, Self-powered Brush Sweeper Drawings

One,Sweeping BrushCategory: Sweepers - Level 1 Sweepers, Level 2 Sweepers, Level 3 SweepersAnhui Quanyou Sweeper Manufacturing Co., Ltd.We are a professional manufacturer of various sweeping brushes: roller sweepers, electric roller sweepers, passive roller sweepers, non-powered roller sweepers, sourceless roller sweepers, cement factory electric roller sweepers, power plant electric roller sweepers, mine wharf roller sweepers.,Polyurethane roller sweepers, magnetic separator brushes, brush rolls, tailings magnetic separator brushes, shoe washers, mining shoe washers, shoe brush for shoe washers, flat brushes, cow massage brushes, body brushes for cows, etc...1The role of the primary cleaner: As part of a multi-stage cleaning systemDuring the first stage, the first-grade cleaner can remove most of the material adhered to the belt, leaving only a thin layer of sticky powder behind.2Installation Method of the Primary Sweeper: The primary sweeper is mounted on the surface of the upper roller, directly below the material track. The structural design of the sweeper itself should prevent material accumulation. Installed outside of the material flow3Installation Precautions for First-Class Sweepers: Ensure the first-class sweeper is installed properly.13.8kpaThe low tension is located on the belt. Clean the belt blade and install it at an incline with appropriate pressure on the front of the roller at the belt's head. At this angle, excessive pressure may damage the belt, joint, or sweeper.1The secondary cleaner's function: The secondary cleaner is installed below the primary cleaner to remove any remaining powder and moisture from the belt. For a stronger cleaning effect, multiple secondary cleaners can be installed.

2Installation method for secondary cleaner: The secondary cleaner is mounted under the return conveyor belt after the head drum. It is typically fixed at the point where the belt leaves the head drum. This ensures that the material scraped by the cleaner can still return to the main discharge opening. In some special cases, the secondary cleaner needs to be installed further away from the unloading point, requiring an extended chute to ensure the material scraped by the cleaner can still be returned to the main discharge opening.4Information needed for selecting a primary sweeper: belt width, head roller diameter, belt speed, material characteristics, applicable temperature.1The role of the three-stage cleaner: Installed after the second stage, the three-stage cleaner performs the final cleaning. This cleaner can be of the same model as the second-stage cleaner or a different model, to provide more effective cleaning and maintenance within the available space.2Installation method for the three-stage cleaner: The three-stage cleaner is typically installed further away from the roller, and it is recommended to place it near a roller. If necessary, an additional tensioning roller can be added at the required location.