Principle:

AdoptATPWith Fluorescein-Bioluminescent reaction using the luciferase complex for determinationATPThe presence or absence. During the reaction period, the fluorescent dye is oxidized and emits fluorescence; the number of photons can be measured.ATPFluorescence meters are used for measurement. The more food residue and microorganisms present on the surface, the correspondingATPThe higher the content, the more photons emitted.ATPFluorescence meter measures photons afterRLU(Relative Luminous Unit)Numerically displayed.

Purpose:

Used for testing the total bacterial count, including E. coli, in food, beverages, raw milk, etc. Also suitable for health monitoring by food production companies, inspection and quarantine, environmental protection, water administration, and customs units. Designed for surface cleanliness monitoring post-cleaning, with the aim of quickly assessing the effectiveness of the cleaning.RFE-3Sanitation monitoring systems provide an effective means for businesses to monitor compliance with health standards operating procedures.(SSOPs)Methods have been employed to not only ensure the quality of the products but also optimize the use of cleaning and disinfectants, reduce costs, and improve the quality assurance system.

Standard:      ISO15161Food and Beverage IndustryISO9001：2001》

Product Features:

1Quantified results

2Real-time and rapid testing

3Compact, handheld size

4Large-screen LCD display

5Enter data using the cursor key

6Low power consumption for instruments, can be powered by standard AA batteries.

7Operational automation (fewer buttons, user-friendly interface)

8Intelligent networking control, data is accessibleUSBBluetooth transmission to computers and other network terminals

9Data shows/OutputRLU、CFU（CFUValues can be freely set according to the testing items (using the formula).

10Wide applicability (no special requirements for operating environment, especially suitable for outdoor environments)

11Interchangeable with a printer

12Intelligent judgment of whether the colony count exceeds the standard

Technical Specifications:

1. Detection sensitivity 1×10^-16mol/L (standard ATP)

2、Sampling Rate 2,000 times/second, 15 seconds/sample

3、Check for duplication CV≤8%

4、Correlation Coefficient R≥ 99.5%

5. Inspection Error ≤±4% or ±4 RLUs

6、Value limit groups 100 sets

7、Storage Capacity 2,000 records

8、Communication Interface:USB and Bluetooth

9、Dimensions:mm ）: 86×189×33

10、Weight 200g (bare unit)

11. Power Supply: 2 AA batteries ≥ 200h or rechargeable batteries

12. Operating Temperature Range: 0℃-60℃

13. Relative Humidity Range: 15-95％

14. Applicable Tube Size: Φ12×155mm

15. Swab volume determination: 1 ml (at the time of measurement)

16. Consumables: Integrated liquid applicator tip