Hot Air Circulation Precision Oven, Industrial Oven, Annealing Furnace, Dryer
The product is mainly used for heating and curing, drying and dehumidifying materials in industries such as biology, chemicals, food, agricultural and sideline products, aquatic products, light industry, etc. It is widely applied in the baking of chemical gases and food processing items, the curing of inks, drying of varnishes, and is extensively used in electronics, motors, communications, electroplating, plastics, hardware chemicals, instruments, printing, pharmaceuticals, etc.PCBoards, powders, dipped, sprayed, glass, wood-based building materials, etc., for drying, tempering, preheating, shaping, processing, etc.
Fan-assisted air supplyRecirculation mode:(Varies by temperature segments)
Horizontal Wind :Left exhaust, right intake, suitable for roasting powdered materials.
Vertical Wind :Bilateral exhaust, central intake, suitable for large industrial products baking.
The hot air circulation oven's air circulation system utilizes a fan-assisted air circulation method, ensuring even air flow.
Product Structure: 1.Protective Device:PIDSelf-regulating, automatic temperature control, automatic timing, temperature timing, alarm and power cut-off, over-temperature power cut-off, leakage protection, motor overload protection, etc., for control circuit fuses, fuseless switches, and other electrical accessories. 2.Equipped with an intelligent temperature controller,PIDAutomatic computationLEDDisplay, AccompanySSRSolid-state relay output, accurately controlling temperature for stability and reliability. 3.Inner lining material: Mirror finishSUS202Stainless steel, fully TIG welded, to prevent dust generation from the machine itself; outer case is made of cold-rolled steel with high-temperature powder coating. 4.Dual over-temperature protection, for enhanced safety and reliability. 5.Internal hot air circulation ensures even heating of the baking items. Fast heating time, stable and accurate temperature; thermal insulation and heat interruption technologies, excellent sealing performance; low body shell temperature, minimal impact on indoor environment temperature; energy-saving and electricity-saving, with strong safety performance. |
6.Available (optional) for nitrogen inflation, achieving an oxidation-free baking environment.
7.The method of air flow can be selected according to the type of baking product the customer uses.
8.Temperature control system, material trays, trolleys, and stackable layers are available for selection according to customer requirements.
9. When roasting items with chemical gases, the inner pot is made of304Or316LStainless steel.
Structural Features
1)The hot air circulation oven is constructed with angle steel, stainless steel plates, and cold rolled steel plates.
2)The insulation is filled with high-density silica aluminum wool (glass wool), ensuring the oven's thermal insulation and user safety.
3)The finned heater can be installed at the bottom, top, or sides.
4)Digital intelligent gauge for temperature control, with LED digital display. PID control mode (fixed-value operation, program operation).
5The blower employs a centrifugal fan.
6Sensor elements use PT100
7Safety Protection Device:Leakage Breaker for Power Supply, Motor Temperature Protection Switch, Temperature Fuse, Independent Temperature Overheat Prevention Device
8Temperature Control Safety Protection: Input circuit breakage detection function, over-temperature alarm function for upper limit temperature, buzzer alarm function, automatic over-temperature prevention function, automatic diagnosis function
9)The air source is driven by a circulating fan motor (equipped with a non-contact switch) that rotates the fan blades through a heater, expelling warm air. This air then travels through a duct into the oven's interior chamber. The air used is then drawn back into the duct to become the air source again and is recycled for heating. This ensures uniformity of the indoor temperature. When temperature fluctuations occur due to door opening and closing actions, the air distribution system quickly resumes operation until the set temperature is reached.
Technical Specifications:
Model | Precision Hot Air Circulation Oven | |||||
FLD-420 | FLD-620 | FLD-640 | FLD-1000 | FLD-920 | FLD-2000 | |
Volume | 420L | 620L | 640L | 1000L | 920L | 2000L |
Temperature Control Range | RT+10～300℃ | |||||
Temperature Resolution | 0.1℃ | |||||
Constant temperature fluctuation | ±0.5℃ | |||||
Uniform temperature distribution | ±2.0℃% Uniform temperature ±1.5℃% or less requires customized motor and precise temperature control. | |||||
Rise rate | 23℃/Min (average, non-linear) (For rates above 5℃/Min, the heating power needs to be increased.) | |||||
Partition | 3PCS | 4PCS | ||||
Timerange | 1～9999Min | |||||
Power Supply | AC380V/50Hz | |||||
Rated Power | 4.5KW | 6.0KW | 6.0KW | 7.5KW | 7.5KW | 15KW |
Inner dimension: mm | 600x550X1300 | 800x600X1300 | 800x800X1000 | 1000x1000X1000 | 1000x600X1600 | 1200x1000X1600 |
Dimensions: mm | 745X730x1670 | 945X780x1670 | 945X1000x1370 | 1145X1180x1390 | 1145X780x1970 | 1600x1140X1970 |
Rated power and dimensions are for reference only; please refer to the actual product for specifics.
Optional accessories:
SS-Stainless Steel304、316L）
SC-Independent temperature controller
FE-Fujitsu Temperature Controller
LP-LEDLCD Program Controller18Section or Segment30Paragraph
TH-ReservedØ25、50、80、100mmTest Holes
PR-Paperless Recorder
TP-Printer (heat-sensitive, panel-type)
RC-Remote Communication Function with ComputerR485Interface, must includeLPOptions)
HC-Heavy-duty partition (load-bearing)50kg）
NL-Nitrogen Filling Interface (optional with flow meter, this feature requires full welding process)
Please contact our sales representative for other specifications, sizes, and features.
