Vacuum Application Equipment - Vacuum Mixing Deaerator

Vacuum Mixing Deaerator

Vacuum Agitator Applications:

Primarily used in the ceramic industry for mixing plaster paste during the production of gypsum molds, while also performing vacuum degassing to ensure the casting body of the mold is dense and bubble-free. The inner surface of the mold is fine and smooth, enabling the production of high-quality ceramic blanks through slurry molding. It can also be used for vacuum degassing in various industries such as adhesives, epoxy resins, coatings, plastic toys, resin crafts, printer ink cartridges, and glassware (this industry requires the DM15 vacuum pump as an option).

1.Technical specifications parameters:

Vacuum Agitator Deaerator

Model: PVD-30-VS

Vacuum Degree: <-0.095 mPa

Stirring Volume: ≤20L (standard with 2 SUS304 stainless steel mixing tanks), additional quantities available for optional purchase.

Agitator Drum Dimensions: Diameter (top opening) 330×330 mm or 300×300 mm (diameter x height).

Studio Size: 565×500×800 mm (Width x Depth x Height)

Platform Size: 355×440 mm (Width x Depth)

Outer Box Dimensions: 950×630×1990 mm (Width x Depth x Height), including casters 100mm, motor 240mm + base 80mm

2.Vacuum Agitator Degassing Machine Body Structure:

2.1Outer Case Material: The shell is made of steel plate, acid pickled and phosphated before being spray-painted, with a white surface color.

2.2Inner Material: 3mm thick SUS304, with special reinforcement methods, ensuring structural strength and durability, and excellent anaerobic drying chamber vacuum effect.

2.3Tempered and bulletproof double-layer glass observation windows, convenient for monitoring product testing conditions

2.4Box-type integrated unit, upper section as a workspace, lower box with an integrated vacuum pump

2.5The cabinet base features 2 brakes and 2 fixed casters for easy movement. The height from the ground is over 10 cm, preventing the bottom from aging due to dampness.

2.6Double-layer high and low-temperature resistant, anti-aging, and hardening silicone seal strips are used between the door and door frame.

2.7Agitator Motor: Reduction motor, variable frequency controller; Power supply 380V, 750W

2.8The agitator platform cylinder is adjustable for height; the blades can be removed for cleaning.

2.9The standard configuration includes 2 stirring blades, with the option to increase the quantity according to demand. Blade diameter is 210mm (measured by the bottom diameter of the T-type drum).

3.Vacuum Agitator Deaerator Electrical System

3.1Vacuum Gauge, featuring a round pointer vacuum pressure gauge display

3.2Timer Relay (for timed stirring and vacuum duration)

3.3Variable-frequency drive, mixing speed (the drive is controlled by a variable-frequency drive installed on the panel for easy adjustment)

3.4Vacuum pump, 2XZ-8, scroll type, suction rate 8L/s, power supply 380V, 1.1KW, noise≤70 dB，（Optional DM15 vacuum pump, 380V, 1.5KW, available for material selection.

3.5 PLCSystem (optional): Programmable vacuum level, programmable vacuum and temperature module, PLC with MES interface (additional module)

Heating and恒温option:

Heating Method: Heating Plate Heating

Temperature Control Range: RT+10～80°C, Temperature Fluctuation: ±0.5°C, Temperature Resolution: 0.1°C

Power supply: 380V/50Hz, approximately 4KW

Emergency Stop Button

Controller Brand: Fujitsu PXR-9